Bosch NDP-45A2-Z12C Installation Manual page 33

AUTODOME IP 4000i
8.
9.
10. Rotate the camera approximately 15 degrees in a clockwise direction to lock firmly into
11. Secure the safety locking screw with the T10 Torx screwdriver.
Bosch Security Systems
Unlock the single safety locking screw on the base of the unit using the T10 Torx
screwdriver.
Attach the camera to the mounting plate by inserting the vertical tab on the plate into the
recessed slot on the top of the camera dome to the right of the safety locking screw.
place.
2.
≈15°
1.
3.
T10
Installation Manual
Installing a Pipe Mount and Camera | en 33
2020-05 | 2.0 |