Bosch NDP-45A2-Z12C Installation Manual page 20

20 en | Installing an In-ceiling Camera in a Suspended Ceiling
4.
Warning!
Over torquing the ceiling clamps can damage the clamp or ceiling. Only tighten the clamp
!
until it contacts the ceiling and you start to feel some resistance. If using a power
screwdriver, set the torque level to the lowest setting.
5.
2020-05 | 2.0 |
3×
Tighten the clamps using the Phillips screwdriver to secure the housing to the ceiling.
Place the trim ring / bubble enclosure in position over the camera block, aligning the
three (3) screws. Tighten the screws firmly to secure the trim ring / bubble enclosure to
the in-ceiling bracket.
Installation Manual
AUTODOME IP 4000i
Bosch Security Systems