Lubrication; Greasing The Bearings - Toro TimeCutter MyRIDE 75747 Operator's Manual

Figure 31
1. Lower muffler shield

Lubrication

Greasing the Bearings

Service Interval: Every 25 hours—Grease the caster
Grease Type: No. 2 lithium grease
1. Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
g299647
operating position.
3. Clean the grease fittings
Note:
Scrape any paint off the front of the
fitting(s).
1. Front caster tire
4. Connect a grease gun to each fitting
5. Pump grease into the fittings until grease begins
to ooze out of the bearings.
6. Wipe up any excess grease.
31
wheel bearings (more often in sandy
soil conditions).
(Figure 32) with a rag.
Figure 32
ARK
g032432
(Figure 32).