Lantronix x6010 User Manual page 147

Lantronix
This command is only available on <x6010> card!
1. Verify the command entered is the one you want.
2. Verify that the device for the command entered can support the function of the command (e.g.,
SOAM functions / commands are only supported by model S323x / C323x NIDs).
3. Retry the operation (e.g., type show soam port and press Enter).
4. If the problem persists, contact Technical Support.
Error: this command should be executed on a device!
1. Verify the command entered is the one you want.
2. Change to the device level; enter the home command, or enter the go command with all of the
location parameters (chassis / slot / port).
3. Retry the operation from the device level prompt (S6010>).
4. If the problem persists, contact Technical Support.
Error: this command should be executed on a port!
1. Verify the command entered is the one you want.
2. Change to the desired port; enter the go command with all of the location parameters (chassis / slot
/ port).
3. Retry the operation from the port (i.e., type show fwd portlist and press Enter).
4. If the problem persists, contact Technical Support.
33493 Rev. F https://www.lantronix.com/
ION x6010 User Guide
Page 147 of 261