CYBEX Eagle Back Extension Owner's Manual page 10

4. Attach each half together using the six BHSCS that were removed.
Install rubber feet
1. Remove each (standard) cone-shaped shipping support using a 3/4" socket or wrench.
2. Place rubber feet (supplied with machine) on each foot of the frame.
3. Cut shipping tie securing top weight.
4. Lift top weight and turn the Increment Weight Adjusting Knob to select 15 lbs (three
increment weights each side.)
5. Remove the three Phillips head screws securing the top (back) shroud and carefully remove
the shroud.
6. Loosen but do not remove bottom two screws.
Cybex Owner's Manual
BHSCS (4)
Locknut (4)
BHSCS (3)
Phillips Head
Screw (3)
10
Locknut (3)
Screw