1. Manuals
  2. Brands
  3. MadgeTech Manuals
  4. Data Loggers
  5. RFCO2RHTemp2000A
  6. Product user manual

MadgeTech RFCO2RHTemp2000A Product User Manual

Wireless co2, humidity & temperature data logger
Hide thumbs Also See for RFCO2RHTemp2000A:
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
RFCO
RHTemp2000A
2
Wireless CO2, Humidity &
Temperature Data Logger
PRODUCT
USER GUIDE
To view the full MadgeTech product line,
visit our website at www.loggershop.co.uk.

TABLE OF CONTENTS

Advertisement

Table of Contents
loading

Related Manuals for MadgeTech RFCO2RHTemp2000A

Summary of Contents for MadgeTech RFCO2RHTemp2000A

  • Page 1: Table Of Contents

    PRODUCT TABLE OF CONTENTS USER GUIDE 2 Quick Start Steps 3 Product Overview To view the full MadgeTech product line, visit our website at www.loggershop.co.uk. 4 Software Installation 5 Activating & Deploying the Data Logger 5 Channel Programming 6 Product Maintenance...

  • Page 2: Quick Start Steps

    QUICK START STEPS Product Operation Product Operation (Wireless) (Plugged In) Install the MadgeTech 4 Software and USB Drivers Install the MadgeTech 4 Software and USB Drivers onto a Windows PC. onto a Windows PC. Connect the RFC1000 wireless transceiver (sold Confirm the data logger is not in wireless mode.

  • Page 3: Product Overview

    Push and hold this button for 5 seconds to activate or deactivate wireless communication. Users have the ability to manually reset the statistics within the device to zero without needing to use the MadgeTech 4 Software. Any data recorded up to that point is recorded and saved. To apply the manual reset, press and hold the scroll key down for three seconds.

  • Page 4: Software Installation

    2. Locate and unzip the downloaded file (typically you can do this by right clicking on the file and selecting Extract). 3. Open the MTInstaller.exe file. 4. You will be prompted to select a language, then follow the instructions provided in the MadgeTech 4 Setup Wizard to finish the MadgeTech 4 Software installation.

  • Page 5: Activating & Deploying The Data Logger

    Different wireless channels may be used to create multiple networks in one area, or to avoid wireless interference from other devices. Any MadgeTech data logger or RFC1000 wireless transceiver that is on the same network is required to use the same channel. If all of the devices are not on the same channel, the devices will not communicate with one another.

  • Page 6: Product Maintenance

    Materials: CO2 Zero Reset: U9VL-J Battery or any 9 V Battery The RFCO2RHTemp2000A is equipped with a self- 1. On the bottom of the data logger, open the battery compartment by pulling in on the cover tab. calibrating sensor that can be reset by the user at any time using the CO2 Zero Reset feature.

  • Page 7: Troubleshooting

    If possible, try switching the battery with a new 9V lithium. • Ensure that the MadgeTech 4 Software is being used, and that no other MadgeTech Software (such as MadgeTech 2, or MadgeNET) is open and running in the background. MadgeTech 2 and MadgeNET are not the compatible with the RFCO2RHTemp2000A.

  • Page 8: Compliance Information

    RFCO RHTemp2000A COMPLIANCE INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 9: Need Help

    • Contact our friendly Customer Support Team at 01929 459 459 or support@wpls.co.uk MadgeTech 4 Software Support: • Refer to the built-in help section of the MadgeTech 4 Software. • Download the MadgeTech 4 Software Manual at madgetech.com. • Contact our friendly Customer Support Team at 01929 459 459 or support@wpls.co.uk MadgeTech Cloud Services Support: •...

Table of Contents