Related Manuals for MadgeTech RFRTDTemp2000A
Summary of Contents for MadgeTech RFRTDTemp2000A
- Page 1 Product User Guide RFRTDTemp2000A RFRTDTemp2000A Precision RTD Based Temperature Data Logger...
-
Page 2: Table Of Contents
Product User Guide Table of Contents RFRTDTemp2000A Data Logger Quick Start Steps ........... 1 Product Overview .......... 2 Additional Features & Operation ....3 Mounting Instructions ........4 Product Maintenance ........5 RMA Instructions ..........5 Recalibration ..........5 General Specifications ........6-7 RFC1000 Transceiver Product Overview .......... -
Page 3: Quick Start Steps
“Wireless: OFF”. If wireless mode is on, press and hold the Wireless button on the device for 5 seconds. The RFRTDTemp2000A comes with a USB cable. Plug one end of the cable into an available USB port on the PC and plug the opposite end of the cable into the communication port on the RFRTDTemp2000A. -
Page 4: Product Overview
• Manual Reset Option: Allows user to manually reset the statistics within the device to 0 without needing to use the MadgeTech software. Any data recorded up to that point is recorded and saved. To apply the manual reset, press and hold the scroll key down for three seconds. -
Page 5: Additional Features & Operation
Creating a Real time Alarm Rule 1. Within the Device tab in MadgeTech 4, in the Alarms group, click Manage Rules, then select New. 2. Enter a name in the Rule name box, and select whether notifications will occur when All conditions are met or Any condition is met. -
Page 6: Mounting Instructions
Most 100 Ohm, 3 wires RTD probes will work, but MadgeTech cannot guarantee the accuracy. To determine whether or not the 3-wire RTD probe will work, the resistance between the two same colored wires should be less than 1 Ohm. -
Page 7: Product Maintenance
4. Push the cover closed until it clicks. Recalibration Standard recalibration for the RFRTDTemp2000A is two points, 50 Ω and 150 Ω. Recalibration is recommended annually for any MadgeTech data logger; a reminder is automatically displayed in the software when the device is due. -
Page 8: General Specifications
USB to mini USB, 250,000 baud for standalone operation or RFC1000 Computer Interface required for wireless operation Software XP SP3/Vista/Windows 7/Windows 8 (MadgeTech 4 only) Operating -20 °C to +60 °C (-4 °F to +140 °F); 0 %RH to 95 %RH non-condensing Environment 3.5 in x 3.25 in x 0.95 in... - Page 9 WARNING: BATTERY MAY LEAK, FLAME OR EXPLODE IF DISASSEMBLED, SHORTED, CHARGED, CONNECTED TOGETHER, MIXED WITH USED OR OTHER BATTERIES, AND/OR EXPOSED TO FIRE/HIGH TEMPERATURE. DISCARD USED BATTERY PROMPTLY, KEEP OUT OF REACH OF CHILDREN. Specifications subject to change. See MadgeTech’s terms and conditions...
- Page 10 Product User Guide RFC1000 Wireless Transceiver Other models available: RFC1000-CE - Approved for European markets RFC1000-IP69K - Splash Proof for harsh environments...
-
Page 11: Product Overview
RFC1000 Product Overview MadgeTech has designed the RFC1000, a high powered transceiver that has a substantially long transmission range, providing enhanced performance in occluded environments (ovens, refrigerators, etc.). The RFC1000 also features an external antenna, allowing more flexibility with mounting positions in both orientation and proximity to metal walls. The device may be used as a repeater, or directly plugged into the Windows PC. -
Page 12: Mounting Instruction
Product User Guide Mounting Instructions For best wireless performance, both the RFC1000 and the MadgeTech data loggers should be mounted in the same orientation. This usually means that the external antenna should be pointing straight up. The antenna can pivot to accommodate either a wall mount or a... -
Page 13: Channel Programming
Channel Programming The RFC1000 transmits data on the 2.4 GHz band and is programmed by default on channel 11. Each MadgeTech Wireless Data Logger and RFC1000 has a set of dip switches with which the channel may be programmed. Different wireless channels may be used to create multiple networks in one area, or to avoid wireless interference from other devices. -
Page 14: Deployment & Activation
Step 1: Use the USB Cable, plug the USB end of the cable into an available USB port on the PC. Step 2: Plug the opposite end of the cable into the communication port on the RFRTDTemp2000A. Step 3: Open the MadgeTech Software. Locate and select the RFRTDTemp2000A in the Connected Devices panel. -
Page 15: Compliance Information
RFC1000 Compliance Information • “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”... -
Page 16: Troubleshooting Tips
• Ensure that no other MadgeTech software (such as MadgeTech 2, or MadgeNET) is running in the background. • Ensure that MadgeTech 4 is being used. MadgeTech 2 and MadgeNET are not the correct software for connecting with the RFRTDTemp2000A.