The RFOT is shipped with wireless transmission in an active, low power state. During normal use, inserting a USB (micro B type) cable into the RFOT will pass control to the MT4 software and disable the wireless transmission. When the USB cable is unplugged, wireless transmission resumes with settings that were chosen in MT4.
Transmit real-time data to the MadgeTech Cloud Services platform via the MadgeTech Data Logger Software running on a central PC or transmit directly to the MadgeTech Cloud without a PC using the MadgeTech RFC1000 Cloud Relay (sold separately).
Stop to end the cycle, and Download to retrieve the data from the logger’s internal memory. For steps to claim the data logger and view data using MadgeTech Cloud Services, refer to the MadgeTech Cloud Services Software Manual at: madgetech.com/mt-cloud-manual.pdf...
Changing the channel settings of the RFOT Connect the RFOT to MT4 with a USB cable. Select a device from the connected devices window, then click the properties icon at the top of screen, or, right click on a device in the connected devices window and select properties.
WARNING: Avoid stretching the O-Ring over the threads. Sharp threads can cut the new O-Ring. O-Ring Maintenance O-Ring maintenance is a key factor when properly caring for the RFOT. The O-Rings ensure a tight seal and prevent liquid from entering the inside of the device. Please refer to the application note “O-Rings 101: Protecting Your Data”, found on the MadgeTech website,...
» Ensure that the MadgeTech 4 Software is being used, and that no other MadgeTech Software (such as MadgeTech 2, or MadgeNET) is open and running in the background. MadgeTech 2 and MadgeNET are not the compatible with the RFOT.
Page 9
Band ISM band 2.405-2.475 GHz. Operation (channels 11 through 25) @ 250 kbps Maximum Output Power +0 dBm typical (RFOT), 20 dBm maximum (RFC1000) Receiver Sensitivity -95 dBm typical (RFOT), -104 dBm typical (RFC1000) Wireless Interface RFC1000, RFC1000-CE, RFC1000-IP69K or RFC1000 Cloud Relay...
Dimensions Hook: 0.625 in (16 mm) Cable Length: 30 in (760 mm) • RFOT-FR: 1.75 in (45 mm), Tip Diameter: 0.063 in (1.6 mm) Tip Length: 1.25 in (32 mm) • RFOT-4-TD: 4.00 in (102 mm), Tip Diameter: 0.125 in •...
Refer to the Troubleshooting section of this document. » Visit our Knowledge Base online at madgetech.com/kbase. » Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com. MadgeTech 4 Software Support: » Refer to the built-in help section of the MadgeTech 4 Software.