Daikin Altherma ERGA04E V3 Series Installer's Reference Manual page 218

10 | Configuration
Installer reference guide
218
#
[9.9.3] [5-05]
Limits when [9.9.1]=Inputs and [9.9.2]=Amp:
#
[9.9.4] [5-05]
[9.9.5] [5-06]
[9.9.6] [5-07]
[9.9.7] [5-08]
Limit when [9.9.1]=Continuous and [9.9.2]=kW:
#
[9.9.8] [5-09]
Limits when [9.9.1]=Inputs and [9.9.2]=kW:
#
[9.9.9] [5-09]
[9.9.A] [5-0A]
[9.9.B] [5-0B]
[9.9.C] [5-0C]
Priority heater
This setting defines the priority of the electrical heaters depending on applicable
limitation. As no booster heater is present, the backup heater will always be
prioritised.
#
[9.9.D] [4-01]
BBR16
See "6.6.4 BBR16 power
functionality.
INFORMATION
Restriction: BBR16 settings are only visible when the language of the user interface is
set to Swedish.
Code
Limit: Only applicable in case of full time
current limitation mode.
0 A~50 A
Code
Limit 1: 0 A~50 A
Limit 2: 0 A~50 A
Limit 3: 0 A~50 A
Limit 4: 0 A~50 A
Code
Limit: Only applicable in case of full time
power limitation mode.
0 kW~20 kW
Code
Limit 1: 0 kW~20 kW
Limit 2: 0 kW~20 kW
Limit 3: 0 kW~20 kW
Limit 4: 0 kW~20 kW
Code
Priority heater:
▪ 0 None : The backup heater is prioritised.
▪ 1 Booster
setting will be reverted back to 0=None and
the backup heater will be prioritised.
▪ 2 Backup
prioritised.
4
limitation" [ 58] for detailed information about this
Description
Description
Description
Description
Description
heater: After restart, the
heater: The backup heater is
ERGA04~08E + EHVH04+08SU18+23E
Daikin Altherma 3 R F
4P629090-1C – 2022.08