Table of Contents
Advertisement
MOUNTING: WHERE DO I MOUNT/POSITION MY SENSORS?
LTV-WSDTH03:
•
Place your wind sensor two times higher than any large object within 50 feet. Wind does not
pass through hard objects; they distort it. If your sensor is too close you will measure the air
turbulence and not the actual wind speed.
•
Place away from trees. Wind passing through trees moves slower than wind in open areas.
•
Mount your sensor in a vertical position with the wind cups on top.
•
The maximum transmission distance from your multi-sensor to your station, in the open air, is
400 feet (121.92 meters).
•
Use the included mounting bracket or your mounting pole (no more than 1-inch outer
diameter to fit). Secure the sensor with screws provided. Tighten the screws to snug (do not
over-tighten).
•
Solar panel must face South to provide correct Wind Direction.
•
General Wind Sensor mounting video:
Include d Mounting Acce ssorie s
Adjustable Base
The main bracket used for mounting
onto flat surfaces or with added U-bolts (not included).
The grooves and Hand Screw allow the brac ket to secure to
angled surfaces while still ensuring the Mast and sensor are level.
http://bit.ly/wind_sensor_mounting
Mast
The horizontal conduit where the sensor
attaches. This Piece will connect to either
the Adjustable Base orPole Adapter.
Hand Screw
Used to lock down and secure the Mast
to the Adjustable Base orPole Adapter.
Alignment Arrows
Provide exact 90 or 1 80 degree
angles when aligned with the arrow
on the Mast.
Pole Adapter
Used in place of the Adjustable Base
for mounting on top of cylindrical
conduits.
1 -Inch Maximum Pole Diameter
5 |
P a g e
Advertisement
Table of Contents
