Batteries: What Do I Need To Know About Batteries; Hardware: Sensors And Station; What Are The Power Requirements For This Station; Power Input: Will This Station Work In Other Countries - La Crosse Technology C79790V2-BBQ1 Faq

BATTERIES: WHAT DO I NEED TO KNOW ABOUT BATTERIES?

• Your Station comes with a CR2032 battery installed to preserve Time and History Records in
the event of a power failure. A power Cord is required to operate this station.
• Your LTV-WSDTH03 Wind/TH sensor requires 3-AA batteries (not included). The solar panel
on the front of the sensor can extend battery life for up to 3 years.
Your C79790V2 station comes with:
LTV-WSDTH03 Sensor with Wind Speed, Wind Direction, Temperature, and Humidity
Transmission at 915MHz RF.

WHAT ARE THE POWER REQUIREMENTS FOR THIS STATION?

LTV-WSDTH03: 3-AA batteries (not included)
C79790V2: 5-volt power cord (required) and CR2032 batteries for backup of your time and
date. Battery operation only will not update sensor or Wi-Fi data. A power cord is required.

POWER INPUT: WILL THIS STATION WORK IN OTHER COUNTRIES??

• Your power cord input is 100-240V and may work in other countries if the proper plug
adapter is used (not included).
Note: There is no guarantee that this power cord will work in other countries.
Your station is a fully functional standalone station.
1. Install 3-AA batteries into your LTV-WSDTH03 Breeze Sensor.
2. Install the power cord into a wall outlet, and the station. Remove the insulation tab from the
CR2032 battery in your station.
3. Let the sensor and station sit within 10 feet of each other for several minutes to lock the
sensor signal to the display.
Once the sensor is connected, you can choose to connect to the La Crosse View™ app or
continue to use it as a standalone station. You can always connect later if you choose.

HARDWARE: SENSORS AND STATION

SETUP AND MOUNTING

SETUP: HOW DO I SET UP MY STATION?

4 | P a g e