Table of Contents
Advertisement
HOW TO REPLACE THE TH READING FROM THE WIND TH SENSOR WITH AN
The new Wind Speed, Wind Direction Sensor with Temperature/Humidity may cause inaccurate
temperature readings in some locations. Because of this, you have the option to remove the TH
sensor reading (from the LTV-WSDTH03) and add an additional TH sensor to read in the
OUTDOOR area of the display.
1. Press the SENSOR button once the Station ID will show.
2. Press the SENSOR button again ID WTH123 THW SENSOR will show.
3. Hold the MINUS (-) button for 5 seconds while viewing ID to delete ID WTH123.
To add a separate LTV-TH2 sensor:
• After deleting the TH sensor built into the Wind Sensor (ID: WTH123), press the SENSOR
button on the station to view the ID, then press the + (PLUS) button to search.
• Press the TX button on the add-on sensor.
• Sensor Icon
WHAT DOES A READING OF "HI" OR "LO" MEAN?
•
If your outdoor temperature reading shows "HI" or "LO," check that your
•
Overpowered or underpowered batteries can cause this reading.
•
If the batteries are good, replace the outdoor sensor.
•
If your temperature is fine but your humidity is reading "HI" or "LO" or dashes, your humidity
may be below 10% Relative Humidity. Your sensor does not read below 10% humidity.
TEMP INTERMITTENT: WHY DOES MY TEMP/HUMIDITY READING COME AND GO?
•
RF (radio frequency) communication may come and go occasionally. This can be normal in
some environments (e.g., moist climates).
•
If a sensor goes out, please wait 2-4 hours for it to reconnect on its own. Please be patient –
these stations can reconnect, after many hours out.
•
RF (radio frequency) communication is not always 100% on. Certain temporary conditions can
cause it to go out for a time (e.g., 100% humidity).
If a miss happens:
•
If the sensor loses connection to the station for any reason, the station will show dashes
after 30 minutes.
•
The station will search for 5 minutes every hour to reconnect with the sensor.
•
Be sure you have good batteries. Manually search for your sensor.
LTV-TH2?
will show to indicate reading is coming from a separate TH sensor.
batteries
are good.
20 |
P a g e
Advertisement
Table of Contents
