Table of Contents
Advertisement
Once the sensor is connected, you can choose to connect to the La Crosse View™ app or
continue to use as a standalone station. You can always connect later if you choose.
MOUNTING: WHERE DO I MOUNT/POSITION MY SENSORS?
LTV-WSDTH01:
For Accurate Measurements
- Ensure the sensor is mounted level with the Solar Panel facing directly
to the south. This will help optimize battery life and transmit correct wind
direction readings.
- Ideally, the Breeze Pro Sensor should be mounted on the tallest object in
your area. Avoid positioning the sensor in line or below eaves, rooflines,
trees, or other objects that may obstruct wind readings.
- Make sure all screws on the Mounting Bracket, Winds Cups, Wind Vane,
and Battery Compartment are securely fastened.
- The sensor should be mounted with the Wind Cups on top.
Note: General Wind Sensor mounting video:
Included Mounting Accessories
Adjustable Base
The main bracket used for mounting
onto flat surfaces or with added U-bolts (not included).
The grooves and Hand Screw allow the brac ket to secure to
angled surfaces while still ensuring the Mast and sensor are level.
Mast
The horizontal conduit where the sensor
attaches. This Piece will connect to either
the Adjustable Base or Pole Adapter.
http://bit.ly/wind_sensor_mounting
Hand Screw
Used to lock down and secure the Mast
to the Adjustable Base orPole Adapter.
1-Inch Maximum Pole Diameter
Alignment Arrows
Provide exact 90 or 180 degree
angles when aligned with the arrow
on the Mast.
Pole Adapter
Used in place of the Adjustable Base
for mounting on top of cylindrical
conduits.
5 |
P a g e
Advertisement
Table of Contents
