Table of Contents

Advertisement

We are weather enthusiasts like you and know proper running equipment is important. These
FAQS provide valuable information on setup, positioning, and troubleshooting your station.
We recommend Adobe Reader version 10 or greater available at:
C79790 FAQS ..................................................................................................................................................................... 1
CONTENTS ......................................................................................................................................................................... 1
GENERAL INFORMATION .................................................................................................................................................. 3
La Crosse View App: How do I connect? ......................................................................................................................... 3
BATTERIES: What do I need to know about batteries? ................................................................................................... 4
HARDWARE: Sensors and Station..................................................................................................................................... 4
What are the power requirements for this station? ......................................................................................................... 4
POWER INPUT: Will this station work in other countries?? ............................................................................................. 4
SETUP AND MOUNTING ................................................................................................................................................... 4
SETUP: How do I setup my station? .................................................................................................................................. 4
MOUNTING: Where do I mount/position my sensors? .................................................................................................... 5
Where to I place my station? ............................................................................................................................................. 6
What is Distance | Resistance | Interference? .................................................................................................................. 7
WEATHER STATION READINGS ....................................................................................................................................... 7
What is this EXTRA SENSOR Area? .................................................................................................................................. 7
How do I add extra sensors to my station? ...................................................................................................................... 8
How do I delete extra sensors from my station? ............................................................................................................. 8
How do I add extra sensors to my app? ........................................................................................................................... 8
How do I interpret the Current Wind Readings? .............................................................................................................. 8
Help me understand the Wind History Readings............................................................................................................. 9
Wind Speed Alert ................................................................................................................................................................ 9
How do I reset the Wind History Readings? .................................................................................................................. 10
How Often does my Wind Sensor Update? ................................................................................................................... 10
How do I view my HI and LO Temperature/Humidity Readings? ................................................................................. 10
How do I reset the Temperature/Humidity Readings? .................................................................................................. 11
How Often does my Temp/Humidty Sensor Update? ................................................................................................... 11
What is Feels Like and Dew Point Temperature? .......................................................................................................... 11

C79790 FAQS

CONTENTS

http://get.adobe.com/reader
1 |
P a g e

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C79790 and is the answer not in the manual?

Questions and answers

Summary of Contents for La Crosse Technology C79790

  • Page 1: Table Of Contents

    FAQS provide valuable information on setup, positioning, and troubleshooting your station. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader CONTENTS C79790 FAQS ..................................1 CONTENTS ..................................1 GENERAL INFORMATION ..............................3 La Crosse View App: How do I connect? ......................... 3 BATTERIES: What do I need to know about batteries? ....................
  • Page 2 TIME: Does this station have Atomic Time? ........................11 How do I manually set the time? ............................. 11 WEATHER STATION MESSAGES ............................ 13 Why does “LOST WIFI”, Etc., show on my station? ......................13 OTHER WEATHER STATION FEATURES ........................14 BACKLIGHT: Does this station have a backlight? ......................
  • Page 3: General Information

    How do I charge the Wind sensor? ..........................21 WIND and Temp INTERMITTANT: Why do my readings come and go? ..............21 WIND ACCURACY: Why is my wind speed inaccurate? ....................22 Why are the sensor readings on my station different from the sensor readings in the app? ........22 GENERAL INFORMATION LA CROSSE VIEW APP: HOW DO I CONNECT? M O B I L E D E V I C E R E Q U I R E M E N T S...
  • Page 4: Batteries: What Do I Need To Know About Batteries

    WHAT ARE THE POWER REQUIREMENTS FOR THIS STATION? LTV-WSDTH01: 1 ML2032 battery C79790: 5 volt power cord (required) and CR2032 batteries for backup of your time and date. Battery operation only will not update sensor or Wi-Fi data. Power cord is required.
  • Page 5: Mounting: Where Do I Mount/Position My Sensors

    Once the sensor is connected, you can choose to connect to the La Crosse View™ app or continue to use as a standalone station. You can always connect later if you choose. MOUNTING: WHERE DO I MOUNT/POSITION MY SENSORS? LTV-WSDTH01: For Accurate Measurements - Ensure the sensor is mounted level with the Solar Panel facing directly to the south.
  • Page 6: Where To I Place My Station

    U-bolt Adapters The illustrations above are not to scale and are for informative purposes onl y. La Crosse Technology is not responsible for any damages or injury that may occur during installation. WHERE TO I PLACE MY STATION? Your station is designed for flexible placement on a desk or countertop, or to position on the wall.
  • Page 7: What Is Distance | Resistance | Interference

    • Position you station six feet from other electronics and wireless devices. If you suspect RF (radio frequency) interference, simply move your weather station a few feet. WHAT IS DISTANCE | RESISTANCE | INTERFERENCE? Distance: • The maximum transmitting range in open air is over 400 feet (121.92 meters) between each sensor and your station.
  • Page 8: How Do I Add Extra Sensors To My Station

    HOW DO I ADD EXTRA SENSORS TO MY STATION? 1. Hold the EXTRA SENSOR button 3 seconds, to add a sensor to the station. 2. Install batteries in the sensor, and if the sensor has a TX button, press the TX button to force a signal.
  • Page 9: Help Me Understand The Wind History Readings

    o The large diamond on the rose indicates the wind direction. o The smaller triangles should be display next to the big triangle to create more emphasis to the direction and let the user know that the direction variates constantly. •...
  • Page 10: How Do I Reset The Wind History Readings

    HOW DO I RESET THE WIND HISTORY READINGS? Your wind speed history readings are reset individually. 1. Press and release the WIND button to view the history reading you wish to reset. 2. Hold the MINUS (-) button for 5 seconds to reset that value to current wind speed. 3.
  • Page 11: How Do I Reset The Temperature/Humidity Readings

    HOW DO I RESET THE TEMPERATURE/HUMIDITY READINGS? Your temperature and humidity readings are reset individually. 1. Press and release the TEMP button to view the reading you wish to reset. 2. Hold the MINUS (-) button for 5 seconds to reset individual temperature or humidity value to current temperature, humidity, time and date.
  • Page 12 2. Press the + or - button to adjust the flashing values. 3. Hold the + or - button to adjust quickly. 4. Press the SET button to confirm adjustments and move to the next item. 5. Press the LIGHT button at any time to exit. Settings Order: •...
  • Page 13: Weather Station Messages

    11. Press SET to confirm and move to pressure units. WIND SPEED will show. MPH will flash. Press the + or - button to select KMH. 12. Press SET to confirm and move to the pressure number. WIND DIR LETTERS will show. NNE will flash.
  • Page 14: Other Weather Station Features

    o Weather Forecast, Precipitation and Weather HI/LO temperature will not be displayed. Note: If connection to app is lost: The last readings from the Internet will remain for up to 3 hours to allow connection to reestablish on its own. OTHER WEATHER STATION FEATURES BACKLIGHT: DOES THIS STATION HAVE A BACKLIGHT? Yes, your station has a backlight with 5 levels of intensity.
  • Page 15: Battery: What Do The Battery Icons Mean

    BATTERY: WHAT DO THE BATTERY ICONS MEAN? • A battery icon will appear near your WIND reading when you need to charge the battery in your wind sensor. • A battery icon will appear near your TIME reading when you need to change batteries in your station.
  • Page 16: Connected Forecast Features

    Note: As the Station builds memory, it will compare the current average pressure to the past forty day average pressure for increased accuracy. The longer the Station operates in one location the more accurate the forecast icons will be. CONNECTED FORECAST FEATURES ADVANCED FORECAST ICONS &...
  • Page 17: Accuweather Hi/Lo Temperatures

    • Hourly Temperature • Hourly Wind Direction Internet Indicator will show in the Forecast and HI/LO areas, and next to Wind Direction. WAIT FOR WEATHER will show if the station is currently updating. Wait a few minutes and try again. ACCUWEATHER HI/LO TEMPERATURES Daily AccuWeather HI/LO Temperature predictions will display below the Forecast Icons.
  • Page 18: How Do I Delete Sensor Id Numbers

    Thermo-Hygro sensor ID, your Wind Speed sensor ID and your Rain sensor ID. Note: If you have Extra Sensors connected to you station you will also see these ID’s. • The sensor ID on the station should match your first six numbers on the barcode of that sensor.
  • Page 19: Temp Accuracy: Why Does My Thermo-Hygro Sensor Read Inaccurately

    TEMP ACCURACY: WHY DOES MY THERMO-HYGRO SENSOR READ INACCURATELY? • The thermo-hygro sensor reads the environment. Since your Temperature/Humidity readings come from the Wind/TH sensor they may occasionally be inaccurate if the sunlight hits the sensor. • If this is a common occurrence you can purchase an LTV-TH2 sensor and replace the Temperature/Humidity Reading from the Wind/TH sensor.
  • Page 20: How Do I Change Between Fahrenheit And Celsius

    • RF (radio frequency) communication is not always 100% on. Certain temporary conditions can cause it to go out for a time (e.g. 100% humidity). If a miss happens: • If sensor loses connection to the station for any reason, the station will show dashes after 30 minutes.
  • Page 21: Wind Reading 0.00: Why Do I Only See 0.00 For Wind Speed

    Note: The screw in the wind cups will fit on the flat side of the metal stem on the sensor. WIND READING 0.00: WHY DO I ONLY SEE 0.00 FOR WIND SPEED? The 0.00 means your wind sensor is connected to your station. •...
  • Page 22 • RF (radio frequency) communication may come and go occasionally. This can be normal in some environments (e.g. moister climates). • If a sensor goes out, please wait 2-4 hours for it to reconnect on its own. Please be patient –...
  • Page 23 • The App updates data every 60-90 seconds. • Since Wind Speed changes frequently, this is the common difference you may notice between your station and your app. 23 | P a g e...

Table of Contents