Table of Contents
Advertisement
2. Install power cord into wall outlet, and into the station. Install batteries into the station if you
wish.
3. Let sensors and station sit within 10 feet of each other for several minutes to lock the sensor
signals to the display.
Once the sensors are connected, you can choose to connect to the La Crosse View™ app or
continue to use as a standalone station. You can always connect later if you choose. Click
for instructions for connecting your station to the La Crosse View™ app.
MOUNTING: WHERE DO I MOUNT/POSITION MY SENSORS?
All of your sensors read independently to your station. This provides freedom to position each
sensor in the best location available.
LTV-W1:
•
Place your wind sensor two times higher than any large object within 50 feet. Wind does not
pass through hard objects, it is distorted by them. If your sensor is too close you will
measure the air turbulence and not actual wind speed.
•
Place away from trees. Wind passing through trees moves slower than wind in open areas.
•
Mount your sensor in a vertical position with the wind cups on top.
•
Maximum transmission distance from your multi-sensor to your station, in open air is 400 feet
(121.92meters).
•
Use the included mounting bracket or your own mounting pole (no more than 1 inch outer
diameter to fit). Secure to the sensor with screws provided. Tighten the screws to snug (do
not over tighten).
LTV-TH2:
•
Place your thermo-hygro sensor at least 6 feet off the ground.
•
For accurate temperature readings your sensor needs to be shaded from the sun in a well
vented area.
•
Mount your sensor vertically to allow moisture to drain out the bottom.
•
Preferred location is on a north facing wall under an eave or deck rail.
•
Avoid placing near a metal roof that will cause it to read high on sunny days.
•
Avoid other sources of heat such as soffit vents, and window or door frames.
•
For accurate humidity readings, avoid placement near vegetation and lakes or other bodies
of water when possible.
•
Place your sensor in a well-vented area. Trapped moisture will cause inaccurate readings.
•
Maximum transmission distance from your thermos-hygro sensor to your station, in open air
is 400 feet (121.92meters).
•
Insert the mounting screw through the front of the transmitter and into the wall. Tighten the
screw to snug (do not over tighten).
Your station is designed for flexible placement on a desk or countertop, or to position on the
wall.
WHERE TO I PLACE MY STATION?
here
4 |
P a g e
Hide quick links:
Advertisement
Table of Contents
