Table of Contents
Advertisement
Set Auto Dim (Hour only):
1. Hold the LIGHT button for 2 seconds to enter dimmer set mode. AUTO DIM OFF will show.
2. Press the + or – buttons to turn dimmer (ON). AUTO DIM ON will show.
3. Press the LIGHT button to select the start time (Hour) for the dimmer. AUTO DIM START
TIME and the hour will flash.
4. Press the + or – buttons to change the hour for the dimmer to be low light level.
5. Press the LIGHT button to select the start time for the dimmer to be on High light level.
AUTO DIM STOP TIME and the hour will flash.
6. Press the + or – buttons to change the hour for the dimmer to be high light level.
7. Press the LIGHT button to confirm exit.
Note: Hold the LIGHT button at any time to exit dimmer settings.
CAN I OPERATE MY STATION ON BATTERY POWER ONLY?
•
No, the power cord is required for your sensors to update.
•
When you operate as a connected station, the power cord is required to maintain Wi-Fi
connection and sensor updates.
If your station goes blank while using the power cord try this:
First: Check that Auto Dim is not active.
Second:
1. Remove the power cord and battery for 2 hours.
2. While unpowered press any button 20 times to discharge electricity.
3. Insert the power cord first then the battery.
4. Your station will reconnect to sensors and WiFi on its own.
BATTERY: WHAT DO THE BATTERY ICONS MEAN?
•
A battery icon will appear near your WIND reading when you need to change the batteries in
your wind sensor.
•
A battery icon will appear near your TIME reading when you need to change batteries in
your station.
WEEKDAY: HOW DO I CORRECT THE DAY OF THE WEEK?
•
When operating as a standalone station, the day of the week will be set when the Year,
Month, and Date are set. If your day of the week is incorrect, yet the month and date are
correct, please go to the
WHY DOES MY STATION GO BLANK?
program menu
and check the YEAR setting.
15 |
P a g e
Advertisement
Table of Contents
