Assembly - NuWave OXYPURE 47001 Owner's Manual

Open
1
Stainless Steel
Pre-Filter
Before Use:
1. Make sure the OxyPure
panel on the back to expose the filters.
2. Pull the filters from their slots.
3. Remove the plastic wrapping from the filters.
4. Fully reinsert the filters into the Oxypure and close
the panel.
5. Remove the sticker from the control panel.
Air Filter Assembly
The OxyPure comes with four different preassembled filters inside the unit (see diagram
®
on the right). Each filter is labeled with a number. Match these with the slot numbers
when installing the filters. When the filters require cleaning, please refer to Cleaning &
Maintenance.
Access to Filters
4
3
2
1
2
Bio-Guard Filter
™
is unplugged. Open the
®

ASSEMBLY

Close
3
Ozone Emission
Removal Filter
4
HEPA/Carbon
Filter
nuwavenow.com | 7