Download Print this page

Operation - NuWave OXYPURE 47001 Owner's Manual

Smart air purifier
Hide thumbs Also See for OXYPURE 47001:

Advertisement

FAN
SPEED
FAN SPEED
LOW
HIGH
You can adjust from 6 different speeds
(LOW to HIGH).
1.
Press FAN SPEED to adjust.
2.
To go back to the lowest fan speed,
continue to press FAN SPEED until the
first bar is lit.
TIMER
TIMER
HR
Use the Timer function to choose the
duration of operation.
1.
Press TIMER. The bar next to ½ hour
will be lit.
• There are 6 preset times to choose
from.
2.
Press TIMER to increase time.
Choose from ½ hour, 1, 2, 4, 8, or
12 hours.
After pressing "TIMER" six times,
all bars will be lit.
3.
Press TIMER once more to turn the
Timer off.
TURBO
TURBO
HR
The Turbo function cleans your air using
the highest fan speed at selected times.
1.
Press TURBO to adjust from the
working time from ½ hour, 1, to 2
hours.
When the selected time has
finished, Turbo will shut off
automatically.
2.
Press TURBO 4 times to exit Turbo
mode.
AIR
ODOR
AIR QUALITY INDICATOR
NO
STRONG
CLEAN
DIRT
ODOR
ODOR
The OxyPure will automatically measure
and display the current air quality in the
room.
OPERATING THE OXYPURE
• The bars will illuminate around AIR and
ODOR, indicating the current air quality.
They will increase and decrease, and are
color coded, according to air quality.
CLEAN AND REPLACE FILTER
INDICATORS
• The lights next to CLEAN FILTER
2 and REPLACE FILTER 4 will
illuminate, indicating that your filters
will need to be cleaned or replaced.
• To reset the indicators, see "Resetting
the Filter and Air Quality Indicators" in
Cleaning & Maintenance.
2 BUTTONS FUNCTIONS
+
ULTIMATE
CLEAN
Eco-Friendly Mode allows you to save
energy by turning the OxyPure fan and
lights off when the unit is not needed. While
in Eco Mode, the fan will automatically run
when the PM level is high and remain off
when the PM level is low.
1. Press POWER and ULTIMATE CLEAN
at the same time POWER will be backlit
yellow.
2. Press POWER and ULTIMATE CLEAN
again to turn off Eco-Friendly Mode.
+
TURBO
TIMER
HR
TURBO with TIMER
When using Turbo with Timer the default
time is set to 2 hours.
1.
Press TURBO to set the running time.
2.
Press TIMER and set the running
time.
HR
nuwavenow.com | 11

Hide quick links:

Advertisement

loading