NuWave OXYPURE 47001 Quick Start Manual

OXYPURE® SMART AIR PURIFIER
POWER
ULTIMATE
AUTO
CLEAN
ECO-FRIENDLY MODE
Function
Button Name
POWER Turns the OxyPure
Allows you to connect the OxyPure to your Wi-Fi
Wi-Fi
MODE network
Allows you to run the OxyPure at the lowest fan
AUTO
AUTO
speed, raising it based on PM level.
Allows you to save energy by keeping the OxyPure
ECO
+
ULTIMATE
CLEAN MODE fan off until it's needed.
ULTIMATE Automatically switches to the highest fan speed
ULTIMATE
CLEAN CLEAN when the PM level rises.
FAN
FAN Adjusts the OxyPure's fan speed.
SPEED
SPEED
LOW HIGH
Turns off the control panel LED lights but keeps the
SLEEP
SLEEP MODE
MODE fan active.
Sets a countdown timer to shut off the OxyPure or
TIMER
TIMER
end the current function.
HR
TURBO Operates at fan speed 6 for a set time.
TURBO
HR
AIR
Air Quality Indicator
AIR
CLEAN DIRT
ODOR Odor Indicator
ODOR
NO STRONG
ODOR ODOR
RESET FILTER 2 RESET FILTER 4
HOLD FOR 2 SECONDS HOLD FOR 2 SECONDS
FAN
TIMER TURBO
SPEED
LOW HIGH HR HR
SLEEP MODE WIFI
on and off.
®
Quick Start Guide
AIR
ODOR
CLEAN DIRTY NO STRONG
ODOR ODOR
CLEAN REPLACE
FILTER 2 FILTER 4
Use
Press POWER to turn the OxyPure
Press and hold POWER to initiate Wi-Fi pairing.
Press AUTO and the Auto back light will turn on. There is no time limit on the Auto Mode. Press
AUTO again to deactivate Auto Mode.
Press and hold POWER and ULTIMATE CLEAN to activate Eco Mode. The Power icon backlight
will be yellow while in Eco Mode.
Press ULTIMATE CLEAN to activate the Ultimate Clean Mode.
There are 6 fan speed levels. Press FAN SPEED to adjust from Speed 1 (lowest) to Speed 6
(highest).
Adjust the Fan Speed prior to activating Sleep Mode. Press and hold FAN SPEED for 2 seconds to
activate Sleep Mode.
Press TIMER to select from the 6 timer settings of 1/2, 1, 2, 4, 8 or 12 hours.
Press TURBO to set the OxyPure to run at the highest speed for 1/2, 1 or 2 hours.
The color coded display shows the current particulate matter level in the air.
The color coded display shows the current odor level in the air.
Refer to the Owner's Manual for more details
Model No: 47001 - 47009
Air/Odor Quality - Detects particles as small as 2.5/1000mm
Low PM Level
Particulate Matter (PM) with a diameter of 2.5 microns or less
0~5 5~10 10~20 20~30
Fan Speeds
1 2 3 4
See the Owner's Manual for details.
on and off.
®
High PM Level
30~50 Over 50
5 6