Advertisement
OPERATING THE OXYPURE
+
TURBO
AUTO
HR
TURBO with AUTO
Use the Turbo mode to set a time limit.
Once the time is up, the OxyPure will switch
to Auto Mode.
1.
Press TURBO to adjust the running
time from ½ hour, 1, or 2 hours.
2.
Press AUTO to begin.
CLEANING & MAINTENANCE
Your OxyPure can easily be moved from
one location to another. Just hold the
OxyPure by the handles on each side and
roll the OxyPure to the chosen location. The
wheels underneath provide extra
maneuverability and mobility whenever it's
needed.
Handles
Before First Use
Wipe the Top Vent and In Flow Vent with
a slightly damp cloth or paper towel. Dry
thoroughly before use.
12 | OxyPure Smart
Wheels
+
ULTIMATE
TURBO
CLEAN
HR
ULTIMATE CLEAN with TURBO
Cleans at the highest fan speed for The
OxyPure runs Turbo mode for the set time,
then switches to Ultimate Clean mode.
1.
Press ULTIMATE CLEAN. The
ULTIMATE CLEAN light will be lit
green.
2.
Press TURBO. The default is ½ hour,
which can be adjusted from 1 to 2
hours.
Press TURBO a fourth time to turn
3.
off.
After Use
Your OxyPure should be cleaned
periodically and after excessive use to
ensure proper performance and function.
To clean the outsides of the OxyPure,
use a cloth, paper towel or vacuum brush
attachment to remove dust and other
particles from the vents. Clean tougher
buildup with a damp cloth or paper towel,
then dry thoroughly.
Cleaning the Top Vent and In Flow Vent
1.
Turn off and unplug the OxyPure.
2.
Use a vacuum with a brush attachment
to remove any dust and debris.
3.
If needed, use a slightly wet paper
towel or damp cloth to remove
heavier buildup. Do not use any
harsh abrasives or cleaning pads on
the Top Vent or any other part of the
OxyPure.
it
Hide quick links:
Advertisement
