Page 2
Do not hesitate to contact him in case of doubt. Positioning ........................39 Serial number plate reading ................40 Smoke extraction ....................40 Electrical connection .................... 41 CUPPONE since 1963 Pre-testing and final inspection ..............47 CUPPONE S.R.L. Checking the operation and first start-up ..........47 Via Sile, 36...
Page 3
CHECKS BEFORE PURCHASING check and agree with the owner Before purchasing the oven and before its installation, that, on installation, all the following conditions are met; they are indispensable for the correct and safe installation, operation and maintenance of the oven. Check with the owner if in the place of installation there are the tools to handle the oven easily Fig.1 √...
Page 4
Checks before purchasing Survey the installation room to make sure it is ade- Inform the owner about the necessary electrical • it is possible to maintain la minimum distance between quate. arrangements (activities to be carried out by a walls, objects the oven and the otherappliances,...
Page 5
Checks before purchasing Evacuation tube, 150 mm [Ø5.91 in.] in diameter (NOT supplied) Max 35°C Max 95°F Min 5°C Max 70% Min 41°F 20 0 30 0 10 0 °C 40 °C 400 50 0 60 0 °C 400 20 0 30 0 10 0 °C 40...
Page 6
OVEN TECHNICAL DATA Electrical data * Warning: the values indicated refer to an oven chamber. Double ovens have 2 inlets and therefore 2 different lines Power supply Power Average consumption Absorption Cable type * Customer panel prot.* Oven model (kW) (kWh) (Nxmm (NxA)
Page 7
A Oven door Control panel C Panel to access electrical components D Technical room fan Hood supply input Oven smoke exhaust G Equipotential H Oven supply input Circuit breaker (only USA models) °C 400 (only USA models) °C 400 Ed. 2304 - 70702510 REV04 TIEPOLO - Pre-installation / Installation...
Page 8
Tiepolo oven technical data | support ALIGNMENT OF THE OVEN WITH THE SUPPORT 20 0 30 0 10 0 °C 40 50 0 60 0 20 0 30 0 10 0 °C 40 50 0 60 0 On the side at the front make the align the...
Page 36
Tiepolo TP 935 oven technical data | capacity 42,40 in 1080mm PIZZA [13.78 in.] PIZZA [19.69 in.] TRAY [23.62x 15.75 in.] Ø 35 cm Ø 50 cm 60x40 cm chamber height: 140 mm [ 5.51 in. ] Ø PIZZAS HOURLY PRODUCTIVITY 81 pizzas Ø...
Page 37
INSTALLATION Symbols used in the manual and on Safety instructions • It is forbidden to install the oven in environments at risk of explosion. the labels applied to the machine • Read this guide carefully before installing the appli- • Installation or maintenance that fails to comply ance, and keep it with care in an accessible place for Indicates that caution is required when performing with the instructions in this manual may cause...
Page 38
Installation Transport Fig.5 Fitted with personal protection equipment, transport the appli- ance to the installation location. Use a suitable vehicle capable of withstanding the weight of the same. Model single double Model single double 122 kg 209 kg 159 kg 278 kg TP435 TP635L...
Page 39
Installation Positioning min. Fig.8 50 mm [ 1,97 in.] The positioning room must comply with the instructions pro- vided on page and 5. Comply with the measure- ments shown in the figure. min. min. 50 mm 500 mm Fig.9 [ 1,97 in.] [ 19,7 in.] The oven must be placed on a base, built by the Manufacturer or by yourself that:...
Page 40
Installation Serial number plate reading Year of production Fig.10 Model The serial number is on the right hand side of the appliance. It provides important technical information that is vital in case of a request for maintenance or repair of the appliance: please do not remove, damage or modify it.
Page 41
Installation Electrical connection Fig.12 Fig.12 The electrical connection must be carried out ex- clusively by qualified personnel after reading the safety warnings at the beginning of the manual. Before installing the appliance, check that the sys- tems comply with the regulations in force in the country where it is going to be used and with the specifications indicated on the appliance rating AC 230...
Page 42
Installation The Manufacturer accepts no liability for failure to comply with the above. If required, the cable must be replaced by the Dealer or its technical service or by a person with similar qualifications to prevent any risk. °C 400 °C 400 °C 400 Electrical data tables on page...
Page 43
Installation AC 230 °C Abbreviation Description Fuses Contactor Safety contactor Warning light 400V Cooking chamber lights Cooling fan Top element switch Top element switch RA1.2.3 Top heating elements RB1.2.3 Bottom heating elements Rotary disconnector Master switch Light switch Safety thermostat Element thermostat Terminal board Transformer 25VA, 230/12V AC...
Page 44
Installation AC 3 230 °C Abbreviation Description Fuses Contactor Safety contactor Warning light 400V 230 Vac 50/60 Hz Cooking chamber lights 0,11/0,09 A Cooling fan Top element switch Top element switch RA1.2.3 Top heating elements RB1.2.3 Bottom heating elements Rotary disconnector Master switch Light switch Safety thermostat...
Page 45
Installation AC 3 N400 °C Abbreviation Description 10nF - 275V capacitor Fuses Contactor Safety contactor Warning light 230V Cooking chamber lights Cooling fan Top element switch Top element switch RA1.2.3 Top heating elements RB1.2.3 Bottom heating elements Rotary disconnector Master switch Light switch Safety thermostat Element thermostat...
Page 46
Installation AC 3 208 °C Abbreviation Description Fuses Contactor Safety contactor Warning light 400V Cooking chamber lights Cooling fan Top element switch Top element switch RA1.2.3 Top heating elements RB1.2.3 Bottom heating elements Rotary disconnector Master switch Light switch Safety thermostat Element thermostat Terminal board Transformer 50VA, 230/12V AC...
Page 47
Installation Pre-testing and final inspection √ Positioning checks The oven is checked and tested in the Manufacturer’s plant be- Is the installation room adequate and compliant with regulations? (correct ventilation, maximum/minimum temperature, fore being delivered to the customer. etc.) The “production process check sheet” enclosed with it guaran- Is the appliance perfectly level? tees that each...
Page 48
MAINTENANCE AND CLEANING Warnings Oven cleaning switch off the Before any cleaning, it is necessary to CLEANING THE EXTERNAL STEEL PARTS power to the appliance (acting on the system switch) and Use a cloth dampened with hot soapy water and end with wear suitable personal protection equipment (e.g.
Page 49
Maintenance and cleaning | cleaning CLEANING THE CHAMBER WITH PYROLYSIS Pyrolysis is a thermochemical crystallization process of food residues that have deposited in the cooking chamber, which takes place by bringing the oven up to 400 °C - 752 °F. Before starting the pyrolysis, remove the coarser food residues with a natural fibre brush.
Page 50
Maintenance and cleaning | replacing components Replacing components The user must replace only the stated compo- nents: in case of a fault or for extraordinary mainte- nance, contact the Dealer, requesting service from an authorised technician. As replacements, always use original spare parts to be requested from the Manufacturer: using non...
Page 51
Maintenance and cleaning | replacing components REPLACING THE REFRACTORY BRICKS Fig.22 REPLACING THE DOOR HANDLE Fig.23 °C 400 20 0 30 0 10 0 °C 40 50 0 60 0 °C 400 20 0 30 0 10 0 °C 40 50 0 60 0 °C 400...
Page 52
CUPPONE since 1963 CUPPONE S.R.L. Via Sile, 36 31057 Silea (TV) - ITALY T +39 0422 361143 F +39 0422 360993 info@cuppone.com - www.cuppone.com...
Need help?
Do you have a question about the Tiepolo TP435 CM-A5-CP Series and is the answer not in the manual?
Questions and answers