Page 1
Original instructions Michelangelo Michelangelo 4.0 OVEN Pre-installation and installation manual ML 435 ML 635 ML 635 L ML 935 Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Michelangelo oven technical data | support ...........8 Michelangelo ML 435 oven technical data ..........9 Before the installation, read the content of this manual Michelangelo ML 635 oven technical data ..........16 carefully: it contains important information regarding product Michelangelo ML 635L oven technical data..........23...
• the cooking chamber capacity is adequate to the owner's needs. The “Technical data” section from page contains the weights and dimensions of the ovens and cooking chambers. Never use this part as a lifting point, this might damage the appliance and injure people. Fig.1 Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Page 4
Checks before purchasing Survey the installation room to make sure it is ade- Inform the owner about the necessary electrical Fig.3 • the following minimum distances of the product quate. arrangements (activities to be carried out by a from walls, other appliances, objects combus- qualified electrician)
Page 5
If this is not possible, in min. min. case of intervention, it will be necessary 50 mm 50 mm to move the oven from its housing with [1.97 in.] [1.97 in.] suitable systems. Fig.3 Fig.4 Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
OVEN TECHNICAL DATA Electrical data * Warning: the values indicated refer to an oven chamber. Double ovens have 2 inlets and therefore 2 different lines ** Warning: for models other than those indicated, contact the company Power supply Power Average consumption Absorption Cable type * Customer panel prot.*...
Page 7
A Oven door Oven smoke exhaust C Control panel D Panel to access electrical components Circuit breaker (only USA models) Equipotential G Oven supply input H Hood supply input Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Michelangelo oven technical data | support ALIGNMENT OF THE OVEN WITH THE SUPPORT If the Michelangelo oven is to be Supports for Michelangelo 635 / 635L placed on a Manufacturer’s sup- / 935 ovens are available upon request port, make the oven rear corners...
The original language used to prepare this manual is English: the Manufacturer is not responsible for any translation/ fatal accidents and null and void the warranty. interpretation or print errors. Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Installation Transport Fig.5 Fitted with personal protection equipment, transport the appliance to the installation location. Use a suitable vehicle capable of withstanding the weight of the same. Model single double ML 435 169 kg - 372.5 lb 302 kg - 665.7 lb ML 635 218 kg - 480.6 lb 380 kg - 837.7 lb...
In both cases, silicone the gap between the oven and the sup- port or the bearing surface, using high temperature resistant silicone. only for the only for the American model American model Fig.9 Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Installation Serial number plate reading Model Year of production Voltage The serial number is on the right hand side of the appliance. It provides important technical information that is vital in case of a request for maintenance or repair of the appliance: please do not remove, damage or modify it.
• must be connected to a compliance with the regulations in force (0.03A A type); omnipolar circuit breaker • must be connected to an allow- ing complete disconnection in overvoltage III category con- ditions. Fig.12 Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Page 42
Installation The Manufacturer accepts no liability for failure to comply with the above. If required, the cable must be replaced by the Dealer or its technical service or by a person with similar qualifications to prevent any risk. Electrical data tables on page Fig.13 Fig.14...
Page 43
Bottom res. full power BF09-MC09 Cooking chamber lights Board cooling fan motor Flue opening motor RA1.2.3 Top heating elements RB1.2.3 Bottom heating elements Safety thermostat Terminal board Top heating element thermocouple Transformer 50VA, 230/12V AC Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Page 44
Wiring diagrams AC 3 230 mod. CD Abbreviation Description CTRL Oven control board Fuses Safety contactor BF09-MC09 Top res. half power BF09-MC09 Top res. full power BF09-MC09 Bottom res. half power BF09-MC09 Bottom res. full power BF09-MC09 Cooking chamber lights Board cooling fan motor Flue opening motor RA1.2.3...
Page 45
Bottom res. full power BF09-MC09 Cooking chamber lights Board cooling fan motor Flue opening motor RA1.2.3 Top heating elements RB1.2.3 Bottom heating elements Safety thermostat Terminal board Top heating element thermocouple Transformer 50VA, 230/12V AC Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Page 46
Wiring diagrams AC 230 mod. TS Θ Abbreviation Description CTRL.B Oven control board Motor start capacitor Noise filter Fuses Digital input for remote ignition Contactor BF09-MC09 Cooking chamber lights Board cooling fan motor Flue opening motor PW.B Power board RA1.2.3 Top heating elements RB1.2.3 Bottom heating elements...
Page 47
Board cooling fan motor Flue opening motor PW.B Power board RA1.2.3 Top heating elements RB1.2.3 Bottom heating elements Safety thermostat Klixon cooling fan Terminal board Thermocouple Light transformer 50VA, 230/12Vac Transformer 20VA, 230/12Vac Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Page 48
Wiring diagrams AC 3 230 mod. TS Θ Abbreviation Description CTRL Oven control board CTRL.SF Flue added board Fuses Safety contactor BF09-MC09 Top res. half power BF09-MC09 Top res. full power BF09-MC09 Bottom res. half power BF09-MC09 Bottom res. full power BF09-MC09 Cooking chamber lights Board cooling fan motor Flue opening motor...
Page 49
Cooking chamber lights Flue opening motor PW.B PW.B Power board MICROPROCESSOR RA1.2.3 Top heating elements RS485 RB1.2.3 Bottom heating elements Rotary switch 12Vcc Safety thermostat Terminal board Thermocouple CTRL.B. RS485 Transformer 70VA, 208/12V AC Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Page 50
Wiring diagrams AC 3 208 mod. DG Abbreviation Description Condenser CTRL.B Oven control board Fuses Contactor Digital input for remote switch-on Cooking chamber lights Flue opening motor PW.B Power board RA1.2.3 Top heating elements RB1.2.3 Bottom heating elements Rotary switch Safety thermostat Terminal board Thermocouple...
Partial reproduction without the manufacturer's consent is prohibited. Measurements are purely indicative and not binding. The original language used to prepare this manual is English: the Manufacturer is not responsible for any translation/interpretation or print errors. Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Installation Error messages mod. CD Error messages mod. TS Displayed Displayed Oven behaviour Solution Oven behaviour Solution code code The heater thermocouple is disconnected or faulty. The alarm shows the oven configuration is wrong. No oven function works. The board and cold coupling temperature probe is faulty. Contact Contact The alarm shows there is no communication between the...
The display will show the firmware version installed on the oven; press the BACK ARROW to exit the screen. VERSIONI HACCP ORE DI VERSIONI HACCP ORE DI FIRMWARE LAVORO FIRMWARE LAVORO STORICO PARAMETRI PARAMETRI ALLARMI Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Page 54
Procedures | Firmware update 19/05/2022 13:00 13:00 19/05/2022 13:00 GESTIONE DATA E ORA LINGUA DATA E ORA LINGUA GESTIONE PROGRAMMI PROGRAMMI VERSIONI HACCP ORE DI VERSIONI HACCP ORE DI FIRMWARE LAVORO FIRMWARE LAVORO STORICO PARAMETRI STORICO PARAMETRI ALLARMI ALLARMI TEST I/O FIRMWARE UPDATE FW WIFI 0.0.0(0)
Page 55
As the firmware is loaded, the bar will turn orange to indicate the progress The screen will restart and display confirm by touching the key Start the uploading process. of the loading procedure. UPLOADING screen. Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
After carrying out the required operation (for example cleaning under the stones), it is necessary to restart the working hours count from zero, resetting the counter. 27/04/2018 13:00 13:00 19/05/2022 13:00 CUPPONE GESTIONE DATA E ORA LINGUA PROGRAMMI AVVISO 27/04/2018 13:00...
Page 57
5* (h)” few seconds to exit the screen. go back to the stand-by the reset of the maintenance hours screen. (hour counter reset). * the shown number is just an example Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
MAINTENANCE AND CLEANING Warnings Oven cleaning switch off the pow- Before any cleaning, it is necessary to CLEANING THE EXTERNAL STEEL PARTS to the appliance (acting on the system switch) and wear Use a cloth dampened with hot soapy water and end with rins- suitable personal protection equipment (e.g.
Page 59
In the "TS" models, during pyrolysis, the light switches off automatically to preserve the bulbs, on the other hand, in the "CD" models it is neces- sary to turn it off manually. Fig.18 Fig.19 Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Maintenance and cleaning | replacing components Replacing components The user must replace only the stated compo- nents: in case of a fault or for extraordinary mainte- nance, contact the Dealer, requesting service from an authorised technician. As replacements, always use original spare parts to be requested from the Manufacturer: using non...
Page 61
Maintenance and cleaning | replacing components REPLACING THE REFRACTORY BRICKS Fig.22 REPLACING THE DOOR HANDLE Fig.23 Fig.22 Fig.23 Ed. 0423 - 70702520 REV09 Michelangelo - Pre-installation...
Page 62
CUPPONE since 1963 CUPPONE S.R.L. Via Sile, 36 31057 Silea (TV) - ITALY T +39 0422 361143 F +39 0422 360993 info@cuppone.com - www.cuppone.com...
Need help?
Do you have a question about the Michelangelo and is the answer not in the manual?
Questions and answers