Setting Up The Paper Delivery Tray - Ricoh Lanier LDD 030 Operating Instructions Manual

Setting Up the Paper Delivery
Tray
A A A A
Raise the paper delivery tray
slightly, and then gently lower it.
B B B B
Lift the paper delivery side plates
and adjust them to the paper size.
C C C C
Lift the paper delivery end plate
and move it to match the print pa-
per size.
D D D D
Lower or lift the paper alignment
wings .
Note
❒ When the guides are up, you
ZBHH050E
might not be able to load the
unit to full cap acity (1,000
sheets) depending on the paper
you are using.
❒ Lift the paper alignment wings
when B5L prints are curled.
When you use 81.4 g/m
or thicker paper
A Lower the paper alignment
wings.
When you use 81.4 g/m
thinner and B5 or smaller paper
A Lower the paper alignment
wings.
When you use 81.4 g/m
or thinner and A4, 8
larger paper
A Lift the paper alignment wings.
Preparation for Printing
2
, 21.6 lb
2
, 21.6 lb or
2
, 21.6 lb
× 11" or
1
/
2
1
11