Product Introduction THINKTPMS T90 is a professional TPMS (Tire Pressure Monitoring System) service tool, with the ability to activate, read, relearn and program TPMS sensors. It can activate the pressure information by receiving signals via low or high radio frequency and reset TPMS module via OBD port. Name Function Type-C Port...
1. For initial use, please follow the steps below to enter the TPMS function menu. Select the wheel which needs to be programmed on the tool, place a THINKCAR sensor close to the TPMS antenna of the tool, and select “CREATE SENSOR” to create a new random sensor ID.
Service Line: 1-909-757-1959 Customer Service Email: support@mythinkcar.com Products tutorial, videos, FAQ and coverage list are available on THINKCAR official website. Step 2: Install TPMS.exe(The downloaded file). Step 3: Insert the SD CARD of the TPMS through CARD READER which you can find in the package into the computer.
Présentation du produit Câble de diagnostic Connectez l'outil au connecteur de liaison de données (DLC) du véhicule. OBDII (EOBD) HINKTPMS T90 est un outil de service professionnel TPMS (système de surveillance de la pression des pneus), avec la capacité d'activer, lire, réapprendre et programmer les capteurs TPMS. Il peut Affiche les résultats des tests.
Page 6
Programmer le capteur Mise à niveau Cette fonction permet aux utilisateurs de programmer les données du capteur du THINKCAR et de Cette fonction permet de mettre à jour certains micrologiciels et les nouveaux modèles de voiture. remplacer un capteur défectueux dont la batterie est faible ou qui ne fonctionne pas.
équipement est limitée à la réparation ou au remplace- Ranura para la Inserte la tarjeta de memoria para leer o escribir los datos / archivos ment. THINKCAR ne prend pas en charge les pertes indirectes et accidentelles. tarjeta de memoria almacenados en la tarjeta.
Page 8
3.Si los datos del sensor no son normales, se visualizarán en rojo. Programar sensor Esta función permite a los usuarios programar los datos del sensor en el sensor THINKCAR y reemplazar un sensor defectuoso con poca batería o que no esté funcionando.
Page 9
La indemnización por daños al tablero causados por defectos del equipo está limitada a su reparación o reemplazo. THINKCAR no será responsable por ninguna pérdida indirecta o incidental.
Page 10
Produkteinführung OBDII (EOBD)- Verbinden Sie das Werkzeug mit der Datenübertragungsverbindung (DLC) Diagnosekabel des Werkzeuges. THINKTPMS T90 ist ein professionelle Reifendruckkontrolle Servicewerkzeug, mit dem Sie Sensoren der Reifendruckkontrolle aktivieren, auslesen, neu einlernen und programmieren können. Anzeige der Testergebnisse. LCD-Bildschirm Es kann die Druckinformationen aktivieren, indem es Signale über niedrige oder hohe Funkfrequen- zen erhält und das Modul der Reifendruckkontrolle über den OBD-Anschluss zurücksetzt.
Page 11
Sensor-ID nicht ermittelt werden kann. Wählen Sie das zu programmierende Rad auf dem Gerät aus, platzieren Sie einen THINKCAR-Sensor in der Nähe der Antenne der Reifendruckkontrolle des Geräts und wählen Sie "SENSOR ERSTELLEN", um eine neue zufällige Sensor-ID zu erstellen.
Schäden am Armaturenbrett, die durch einen Defekt dieses Geräts verursacht wurden, beschränkt Слот для Вставьте в него карту памяти для считывания или записи данных / файлов, sich auf Reparatur oder Ersatz. THINKCAR trägt keine indirekten und zufälligen Verluste. карты памяти хранящихся на карте памяти.
Page 13
3. Если данные датчика ненормальны, они будут отображаться красным цветом. Программирование датчика Эта функция позволяет пользователям запрограммировать данные датчика THINKCAR и заменить неисправный датчик с низким временем работы батареи или неработающий датчик. Для программирования датчика THINKCAR доступны следующие опции: СОЗДАТЬДАТЧИК;...
Page 14
КОПИРОВАНИЕИДЕНТИФИКАТОРАПУТЕМАКТИВАЦИИ: Эта функция позволяет Select Device(V1.07.013) пользователям записывать полученные исходные данные датчика в датчик THINKCAR. Она English используется после срабатывания исходного датчика. connection mode СОЗДАНИЕМУЛЬТИДАТЧИКА (1-8): Эта функция позволяет пользователям программировать несколько датчиков одновременно. Одновременно можно запрограммировать до 8 датчиков.
Presentazione del prodotto Cavo diagnostico Collega lo strumento al connettore di collegamento dati (DLC) del veicolo. OBDII (EOBD) THINKTPMS T90 è uno strumento di servizio TPMS (sistema di monitoraggio della pressione del pneumatico) professionale, con la capacità di attivare, leggere, riapprendere e programmare i Visualizza i risultati di test.
Page 16
Questa funzione è per l'aggiornamento di alcuni firmware e nuovi modelli di auto. È possibile anche Questa funzione consente agli utenti di programmare i dati del sensore sul sensore THINKCAR e individuare la guida sullo strumento: GUIDA - Guida aggiornamento del software.
La compensazione per danni causati al cruscotto per difetto di questo dispositivo è limitata alla riparazione o alla sostituzione. THINKCAR non sostiene alcuna perdita indiretta e incidentale.
Page 18
IC Requirement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference,including interference that may cause undesired operation of the device.
Need help?
Do you have a question about the TKTT3 and is the answer not in the manual?
Questions and answers