Advertisement

Quick Links

THINKCAR
Version: V1.00.001
Statement: the THINKCAR has full intellectual property rights to the software used in this
product. For any act of reverse or cracking the software, the Company will stop the product
and reserve the right to pursue the legal liability.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Thinkcar X10

  • Page 1 THINKCAR Version: V1.00.001 Statement: the THINKCAR has full intellectual property rights to the software used in this product. For any act of reverse or cracking the software, the Company will stop the product and reserve the right to pursue the legal liability.
  • Page 2 You can visit the website: http://www.thinkcar.com for information about THINKCAR products; you can also write to: Shenzhen Thinkcar Tech Co., Ltd., No. 2606, F26, Building 4, Phase II of Tian'an Yungu Industrial Park, Longgang District, Shenzhen City, Guangdong Province, China, to contact Think to obtain written consent to the use of the manual.
  • Page 3 THINKTOOL X10 www.thinkcar.com Adapter information Do not wet the equipment and adapter. Do not soak the equipment into water or place it in position where it may absorb water or other liquids. The charging device may be hot in normal use. Ensure good ventilation around the charging device.
  • Page 4: Table Of Contents

    THINKTOOL X10 www.thinkcar.com Content 1. Overview............................... 1 1.1 Instruction ............................1 1.2 Recognize diagnosis host........................1 1.3 Performance parameter........................2 1.4 Equipment operation ........................... 2 1.5 Shortcut setting............................ 2 2. Rapid use introduction ........................3 2.1 First use ............................... 3 2.1.1 Start ............................
  • Page 5 THINKTOOL X10 www.thinkcar.com 5.24 Seats Calibration ..........................22 5.25 Coolant Bleed ..........................22 5.26 Tyre Reset ............................22 5.27 Windows Calibration ........................22 5.28 Language Change ........................... 22 5.29 AC System Relearn/Initialization ..................... 22 5.30 Intelligent Cruise Control System ....................22 5.31 Engine Power Balance Monitoring ....................
  • Page 6: Overview

    1. Overview 1.1 Instruction The THINKTOOL X10 video remote diagnosis equipment (hereinafter referred to as THINKTOOL X10) has the strongest dual diagnosis mode, which can not only realize the local diagnosis function, but also complete the remote vehicle diagnosis through real-time communication of equipment, so that the diagnosis is not bound by space.
  • Page 7: Performance Parameter

    THINKTOOL X10 www.thinkcar.com 1.3 Performance parameter Operating system Android 10 Camera Rear 13 megapixel camera Memory 4 GB Network connection Wi-Fi/Ethernet interface Memory capacity 128 GB Bluetooth Bluetooth 5.1 0℃ ~ 50℃ Battery 12600mAh/ 3.7V Work temperature Storage temperature -20℃ ~ 60℃...
  • Page 8: Rapid Use Introduction

    THINKTOOL X10 www.thinkcar.com 2. Rapid use introduction 2.1 First use The following setting should be made in fi rst use. 2.1.1 Start Long press the power key to start the machine, and the screen displays as follows: 2.1.2 Language Setting Select the tool language from the languages displayed on the interface.
  • Page 9: Choose Time Zone

    THINKTOOL X10 www.thinkcar.com 2.1.4 Choose Time Zone Choose the time zone of the current location, then the system will automatically cofigure the time according to the time zone you chose. 2.1.5 User agreement Read all the terms and conditions of the user agreement carefully and select "Agree to the Terms".
  • Page 10: Account Creation

    THINKTOOL X10 www.thinkcar.com 2.1.6 Account creation You need to enter your email address to register an account. If you already have other THINKCAR products and have registered, you can directly use the existing account to log in. 2.1.7 Diagnosis equipment activation Enter the serial number and activation code of the equipment to activate it.
  • Page 11: Function Menu

    Windows Calibration, IMMO PROG(optional). • [Upgrade]: the model diagnosis software, client and fi rmware can be upgraded online with one key. • [ThinkStore]:ThinkStore is launched by THINKCAR, including software and hardware products. • [Message]: to display list of contacted merchants and relevant information.
  • Page 12: Battery Use

    THINKTOOL X10 www.thinkcar.com 2.5 Battery use • If the battery has not been used for a long time or the battery is exhausted, it may not be able to start up the machine properly when charging. This is normal. Please charge the battery for a period of time before starting the machine.
  • Page 13: Diagnosis

    THINKTOOL X10 www.thinkcar.com 3. Diagnosis When using the diagnosis function, the user can use VIN identifi cation to quickly enter the system for diagnosis, or manually select the model and system for diagnosis. 3.1 VIN automatic identifi cation Automatic VIN identification gives you faster access to the test vehicle system, and models and submodels do not need to be manually selected.
  • Page 14 THINKTOOL X10 www.thinkcar.com ! Note: diagnosis software for diff erent models may have diff erent diagnosis menus. 2) Select diagnosis mode: after the connection is successful, the screen will enter the diagnosis item selection interface. ! Note: the interface has two display modes of system topology and system list, with the same functions. You can switch them according to your personal habits.
  • Page 15: Select Diagnosis System

    THINKTOOL X10 www.thinkcar.com Click [Smart Scan], the system starts to scan for fault codes in each system and displays specifi c scan results. Click [Report] to generate vehicle health report. B. System Scan: what systems the vehicle is equipped with are automatically scanned.
  • Page 16 THINKTOOL X10 www.thinkcar.com model) is taken as example. ! Note: in the system topology mode, click [EMC] fi rst and then click [Enter]. 2) Click to diagnose the function. ! Note: the diagnosis menu may vary from vehicle to vehicle.
  • Page 17 THINKTOOL X10 www.thinkcar.com c) Clear fault code On the function selection page, click [Clear Fault Code], the system automatically deletes the existing fault code and pups up the dialog box "Clear Fault Code successfully". ! Note: for general vehicles, please operate strictly following the routine sequence: fi rst read the fault code, then clear the fault code, carry out trial run, read the fault code again for verifi...
  • Page 18 THINKTOOL X10 www.thinkcar.com [Combine]: The graphs are presented in a combination mode for user to compare (*Note: diff erent data stream options are marked in diff erent colors). Screen button: 【Graph】: Parameters are displayed in the waveform mode. 【Combine】: Graphs are presented in a combination mode for users to 【Graph】...
  • Page 19 THINKTOOL X10 www.thinkcar.com In the value mode, click to display the current (single) data stream as a waveform. On the waveform display page, users can perform the following operations: 【Upper Limit/Lower Limit】: Click to set Max/Min. If the run value exceeds the set value, the system issues a warning.
  • Page 20 THINKTOOL X10 www.thinkcar.com Used to collect standard data streams, standard values stored can be imported into the [Standard Range]. Click [Collect] to start recording the sample data stream (Note: the system only records the data stream option with unit). After the recording is complete, click to terminate recording, then the system automatically jumps to the value modifi...
  • Page 21: Remote Diagnosis

    4.2 Connect and start remote diagnosis 1) Shut down vehicle ignition switch. 2) Connect one end of the DB30 diagnosis cable to the host of THINKTOOL X10, and connect the other end to the OBDII diagnosis port of the vehicle.
  • Page 22 DB30 diagnosis cable 3) Connect one end of the delivered network cable to the LAN/WLAN port of the THINKTOOL X10 and the other end to the network modem LAN jack. ! Note: it suggests that the network is of 100 mbit broadband and above.
  • Page 23: Maintenance

    ! Note: in "Message" on the home page, you can view the records of the servers you contacted. 5. Maintenance THINKTOOL X10 supports maintenance service of 35 models, and maintenance services applicable to diff erent models are somehow diff erent.
  • Page 24: Sas Reset

    THINKTOOL X10 www.thinkcar.com b) After the ECU is powered off, the memory of the ECU memory is lost, and throttle matching is required. c) After replacing the throttle assembly, throttle matching is needed. d) After replacement or disassembly of the air inlet, the coordination of ECU and throttle body to control the idle speed is aff...
  • Page 25: Dpf Reg

    THINKTOOL X10 www.thinkcar.com 5.7 DPF Reg. The DPF regeneration function is mainly to regularly remove particles in the trap by using a combustion oxidation method (e.g. high temperature heating combustion, and combustion with fuel additives or catalysts to reduce the ignition point of particles), so that the trap performance is always kept at the best stability.
  • Page 26: Afs Reset

    THINKTOOL X10 www.thinkcar.com control module in the air suspension system are replaced or the levelness of the vehicle is incorrect, it is necessary to perform this function to adjust the body height sensor for level calibration. 5.13 AFS Reset The self-adaptive headlight system can be initialized with this function. The self adaptive headlight...
  • Page 27: Stop/Start Reset

    THINKTOOL X10 www.thinkcar.com 5.21 Stop/Start Reset By swiping the trip computer hiding, the vehicle can enable or disable the automatic start-stop function (provided that the vehicle has the hiding function, supported by the hardware). 5.22 NOx Sensor Reset It is a sensor used to detect nitrogen oxide (NOx) content in engine exhaust. Re-initialization of NOX fault and replacement of NOX catalytic converter require resetting the catalytic converter learning value stored in the engine ECU.
  • Page 28: Motor Angle Calibration

    Activation: the sensor ID, wheel pressure, sensor frequency, tire temperature and battery status can be activated with the function. b) Programming: with this function, sensor data can be programmed to a blank THINKCAR sensor to replace one that is low on power and is not working properly. Three sensor programming methods...
  • Page 29: Feedback

    In case of an unresolvable problem or a problem with the diagnosis software, click [Other]→[Feedback], and you may also send the latest 20 test records back to THINKCAR. After receiving your feedback, we will follow up and deal with it in time, so as to improve our product quality and user experience. Click [Feedback], and the following dialog box will pop up: Click [OK] to enter the feedback selection interface of vehicle diagnosis records.
  • Page 30: Repair Info

    The model brand, model, year and other information can be input to query support functions and diagnosis system. 6.3.3 Video You can watch the video about THINKTOOL X10. 6.3.4 Learning materials You can view the playback of the operation steps of the special functions of each brand model, helping users to learn the operation of the special functions of each brand model online without connecting the vehicle.
  • Page 31: Thinkfile

    This function is disabled on the device by default. You need to activate this function using an activation card before using it. This function shall be paired with ADAS calibration tool of THINKCAR. It is mainly for calibrating driver assistance systems such as cameras and radars, e.g. front-facing cameras for lane departure warning systems, radar sensors for ACC (self-adaptive Cruise control) or cameras for self- adaptive headlights.
  • Page 32: Thinkstore

    THINKTOOL X10 www.thinkcar.com 7. ThinkStore ThinkStore is launched by THINKCAR, including software and hardware products. In the store, you can buy required software, each software has a detailed functional introduction. All THINKCAR hardware is also available for purchase online. 8. Upgrade To ensure that you enjoy better functions and upgrade services, you are advised to upgrade the software from time to time.
  • Page 33: Vci

    THINKTOOL X10 www.thinkcar.com 9.1 VCI If multiple equipment serial numbers are registered with the same THINKTOOL X10 account, use this item to select the corresponding equipment serial numbers. 9.2 Activate VCI It is used to activate the equipment and check activation help information.
  • Page 34: Business Management

    Q: Can the same type of charger be used to charge the host? A: No, please charge with the attached charger. The Company is not responsible for any damage or economic loss caused by the use of adapters not provided by THINKCAR. Q: How can the electricity be saved? A: Turn off...
  • Page 35 (the serial number consists of 12 digits, and the activation code consists of 8 digits). Activation code is valid Contact the after-sales of THINKCAR or regional sales. It prompts the setting is omitted Contact the after-sales of THINKCAR or regional sales.
  • Page 36 THINKTOOL X10 www.thinkcar.com Q: Non-standard OBDII vehicle diagnosis interface connection? A: There is non-standard conversion connector in the equipment packing case. Connect it according to the method described in the manual. Q: Why cannot diagnosis equipment communicate with vehicle ECU? A: Ensure that the diagnosis cable is connected correctly.
  • Page 37 THINKTOOL X10 www.thinkcar.com IC Requirement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference,including interference that may cause undesired operation of the device.
  • Page 38 The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this THINKTOOL X10 when worn on the body, as described in this user guide, is 0.65W/Kg (Body-worn measurements differ among models, depending upon available...
  • Page 39: Warranty Terms

    ▪ This warranty applies only to users and distributors who purchase THINKCAR products through normal procedures. ▪ Within one year from the date of delivery, THINKCAR warrants its electronic products for damages caused by defects in materials or workmanship. ▪ Damages to the equipment or components because of abuse, unauthorized modifi cation, use for non- designed purposes, operation in a manner not specifi...

Table of Contents