Related Manuals for Thinkcar THINKTPMS G1
Summary of Contents for Thinkcar THINKTPMS G1
- Page 1 Thinkcar Tech Inc THINKTPMS G1 Follow us on User Manual @thinkcar.official @ObdThinkcar...
- Page 2 Statement: THINKCAR owns the complete intellectual property rights for the software used by this product. For any reverse engineering or cracking actions against the software, THINKCAR will block the use of this product and reserve the right to pursue their legal liabilities.
- Page 3 20cm between the radiator & your body. This transmitter must not be colocated or pacemaker failure. operating in conjunction with any other antenna or transmitter. Use the device only with the THINKCAR specific diagnostic tool that comes loaded with the TPMS module. Do not install programmed TPMS sensors in damaged wheels.
-
Page 4: Table Of Contents
TPMS module via OBD interface. Product Parameters THINKTPMS G1 needs to work with the Thinkcarspecfic diagnostic tool to perform the TPMS sensor activation, programming and relearn functions. Working Principle... -
Page 5: Product Parameters
Charging Resolution 168*128 pixel Plug one end of the charging cable into the charging port of the THINKTPMS G1, and the other end to an external power adaptor, then connect the power adaptor to the AC outlet. Input voltage While being charged, the LED illuminates red. Once the LED changes into green, it Working current ≤1A... -
Page 6: Binding
Binding Binging： For initial use, user needs to bind the THINKTPMS G1 to the mobile phone or diagnostic tool. Binding on the ThinkDiag+ APP. 1. Tap TPMS on the menu of the ThinkDiag+ APP. 2. Tap Activate. 3. The following screen will pop up. -
Page 7: Tpms Operations
For early magnet-activated sensors, place the magnet over the stem and then place the THINKTPMS G1 THINKTPMS G1 is bound to the diagnostic tool, keep the device ON and tap OK to ignore this step. If it alongside the valve stem. - Page 8 If a random ID is entered, please perform the TPMS Relearn function after programming is finished. If *Note: Once programmed with Replication, the THINKCAR-sensor can be installed in the wheel directly the original ID is entered, there is no need to perform Relearn function.
- Page 9 THINKCAR TECH does not bear any indirect and incidental Q: Why is my THINKTPMS G1 always displayed in English even the system language of losses. THINKCAR TECH will judge the nature of the equipment damage according to its my diagnostic tool is set as non-English? prescribed inspection methods.
Need help?
Do you have a question about the THINKTPMS G1 and is the answer not in the manual?
Questions and answers