1 Introduction Power supply AC 220 V/ 110 V ± 10% Thinkcar TK-IMT602 Injector Cleaner & Tester is an electronic mechanical product which Frequency 50 Hz / 60 Hz ± 0.5 combining ultrasonic clean technology and microcomputer control simulation automobile fuel Relative humidity <...
THINKCAR THINKCAR www.thinkcar.com www.thinkcar.com 3.3 Tool drawer description 3.2 Control Panel 8.8.8.8. 8.8.8.8. kg/cm FUNCTIONS/PULSE WIDTH Four - bit red tube displays selected functions. Select the function【FUNCITONS MENU】in (1) Adaptors for reverse cleaning order by【+】and【-】.【01】means the top one,【13】means the last one. When the (2) 10-13.6 mm conical adaptor for spray testing...
THINKCAR THINKCAR www.thinkcar.com www.thinkcar.com 2)Turn on the power. Plug the end of the power cord into the socket of the equipment and the other end into the AC 220 V power outlet. Turn on the power switch at the side of the main unit.
Page 6
THINKCAR THINKCAR www.thinkcar.com www.thinkcar.com 1)Connect the quick connector of the black oil outlet pipe on the machine with the male end · The system will automatically simulate the working status and oil inject value of injector at connector on the oil separator, and plug the fuel injector drive line.
THINKCAR THINKCAR www.thinkcar.com www.thinkcar.com 【09】Medium Speed Spray Value Test 1)Press the【+】and【-】key of 【FUNCTIONS/PULSE WIDTH】 to select the 09 Medium Speed Spray Value Test mode. 2)The following operation procedures is same with the 08 item. 【10】High Speed Spray Value Test 1) Press the【+】and【-】key of 【FUNCTIONS/PULSE WIDTH】 to select the 10 High Speed Spray Value Test mode.
THINKCAR THINKCAR www.thinkcar.com www.thinkcar.com 3) The system default time is 1 minute. Press【START】to start working. and return pipes of the original car to make it a loop. (Note: The fuel tank cap must be opened, otherwise it is dangerous.) 4) Adjust the pressure to 36 - 45 psi.
THINKCAR TECH does not bear any indirect and incidental losses. 5. Use of unqualified test agent will cause corrosion of the oil pump, oil supply pipeline and THINKCAR TECH will judge the nature of the equipment damage according to its prescribed malfunction of the pressure gauge.
Need help?
Do you have a question about the TK-IMT602 and is the answer not in the manual?
Questions and answers