Getting Printer Information Over The Network; Current Printer Status - Ricoh AP610N Software Manual

Monitoring and Configuring the Printer
Getting Printer Information over the
Network
This section explains details of each item displayed in the printer status and in-
formation.

Current Printer Status

The printer status can be checked using the following commands:
• UNIX: Use the "lpq" command and "rsh", "rcp", and "ftp" parameters.
• mshell: Use the "status" command.
Messages
Access Restricted
Add staples (Booklet: Back)
Add staples (Booklet: Both)
Add staples (Booklet: Front)
Adjusting...
Call Service Center
Canceled
Canceling Job...
Card/Counter not inserted
Coin or amount not inserted
Coin/Key Counter not inserted
Configuring...
Cover Open: ADF
Cover Open: Duplex Unit
Cover Open: Finisher
Cover Open: Front
Cover Open: Front/Left
Cover Open: Paper Exit / Rear
Cover Open: Right
Cover Open: Top
Data Size Error
Description
The job was canceled because user have no
authority.
The staple of booklet finisher (back) is ex-
hausted.
The staple of booklet finisher is exhausted.
The staple of booklet finisher (front) is exhaust-
ed.
The machine is initializing or calibrating.
There is a malfunction in the machine.
The job is reset.
The job is being reset.
The machine is waiting for prepaid card or key.
The machine is waiting for coin to be inserted.
The machine is waiting for coin or key counter.
Setting is being changed.
The document feeder is open.
The cover of the duplex unit is open.
The cover of Finisher is open.
The front cover is open.
The front cover or left cover is open.
The paper exit cover or rear cover is open.
The right cover is open.
The top cover is open.
The data size error occurred.
212