Ricoh AP610N Software Manual page 130

Making Printer Settings Using the Control Panel
❖ Paper Type
If you use various types of paper, select the paper type for tray 1, tray 2, tray
3 or bypass tray.
For details about types of paper loaded in each tray, see "Paper and Other
Media Supported by This Printer", Maintenance Guide.
❖ Tray 1, 2, 3
Plain Paper, Recycled Paper, Special Paper, Color Paper, Letterhead,
Preprinted
❖ Bypass Tray
Plain Paper, Recycled Paper, Special Paper, Color Paper, Letterhead,
Preprinted, Transparency, Thick Paper
❒ Default : Plain Paper
❒ Only the installed trays appear on the panel display.
❖ Tray Locking
If you use various types of paper, you can lock a tray to prevent printing on
different types of paper such as letterhead or colored paper. When [Auto Se-
lect] is selected in [Paper Source] from the printer driver, the locked tray is not
used. You can select each tray set to on or off.
❒ Default : Off
❒ Only installed trays appear on the display panel.
❒ You cannot lock multiple trays.
❒ If you need to have a tray locked, you must select the tray using printer driv-
er.
❒ When a locked tray is selected from the printer driver, the printer does not
search for another tray.
❖ Tray Priority
You can set a tray to be checked first when [Auto Tray Select] is selected in [Pa-
per Source] from the printer driver.
• Tray 1, Tray 2, Tray 3, Bypass Tray
❒ Default : Tray 1
❒ Only installed trays appear on the display panel.
❒ It is recommended that you load paper of the size and orientation you use
most frequently in the tray selected in [Tray Priority].
130