Brother BAS-342G Basic Operation Manual page 19

Hide thumbs Also See for BAS-342G:

4-11. Adjusting the air pressure [6]

4-12. Adjusting the speed controller [7]

Upper knob

Lower knob

Valve 2

2565B

Valve 1

2566B

BAS-342G

Lift up the handle (2) of the regulator (1) and then turn it to

adjust the air pressure to 0.5 MPa.

After adjustment is complete, push the handle (2) downward to

lock it.

You can adjust the lifting and lowering speeds for the work

clamp using the knobs on the valves.

• When the upper knob is tightened, the lifting speed becomes

slower. When it is loosened, the lifting speed becomes faster.

• When the lower knob is tightened, the lowering speed

becomes slower. When it is loosened, the lowering speed

becomes faster.

Reference adjustments

Upper knob

Valve 1

Lower knob

Upper knob

Valve 2

Lower knob

You can operate the work clamp when the power is turned off

by pressing the manual buttons (1).

4. INSTALLATION

Fully tighten

Fully tighten and then loosen by

8 turns

Fully tighten and then loosen by

5 turns

Fully tighten