!
safety
Only.qualified.persons.should.change.the.switch.
settings.or.replace.fuses.
Where.appropriate,.remove.the.mains.supply.from.
units.before.removing.covers.
Warranty
Equipment.requiring.attention.under.warranty.
must.be.returned.to.your.supplier..No.claims.will.
be.considered.where.Renishaw.equipment.has.
been.misused,.or.repairs.or.adjustments.have.
been.attempted.by.unauthorised.persons.
changes to equipment
Renishaw.reserves.the.right.to.change.
specifications.without.notice.
cNc machine
CNC.machine.tools.must.always.be.operated.
by.competent.persons.in.accordance.with.the.
manufacturer's.instructions.
care of the probe
Keep.system.components.clean.and.treat.the.
probe.as.a.precision.tool.
Preliminary information
Probe IP rating
IPX8
Related publications
When.you.install.the.OMP40.probe.system,.
you.will.also.need.to.refer.to.one.or.more.of.the.
publications.listed.below.for.details.of.how.to.
install.the.ancillary.equipment..
•.
Optical.module.machine.(OMM).installation.
and.user's.guide.–.Renishaw.part.No...
H-2000-5044.
•.
MI.12.interface.unit.installation.and.user's.
guide.–.Renishaw.part.No..H-2000-5073.
•.
Optical.machine.interface.(OMI).installation.
and.user's.guide.–.Renishaw.part.No...
H-2000-5062.
•.
PSU3.power.supply.unit.installation.and.
user's.guide.–.Renishaw.part.No...
H-2000-5057.