Table of Contents
Advertisement
E Press the [Exit] key.
Reference
To go on to specify a paper
size, press the [Pap. Size]] key.
See
P.40 "When copying
onto custom size copy paper".
See
P.41 "When copying
onto standard size copy paper".
E
Set your originals, then press the
{ { { { Start} } } } key.
Important
When copying onto OHP trans-
parencies, remove copied sheets
one by one.
Note
Push on the engraved center
point of the bypass tray to close it.
Copying from the Bypass Tray
When Copying onto
Envelopes
Important
If you select Thick Paper as the Pa-
per Type setting and select Stand-
ard or Custom as the Paper Size
setting, these functions will remain
in effect even after Auto Clear or
pressing the {Clear Modes} key.
You can alter this behavior by
changing "12. Reset Bypass Set".
See
P.80 "1. General Features
Reference
For detail about the recommended
envelopes, see
per"
A
Open the bypass tray.
3
/
"
4
P.17 "Copy Pa-
43
2
Advertisement
Table of Contents
