Table of Contents
Advertisement
When the Toner Saving mode is
specified , the whole image gets
lighter.
When you cannot make clear
copies, you can adjust the quali-
ty level of copies for each of the
original types (Text, Text·Photo,
Photo). See
P.63 "If You Can-
not Make Clear Copies"
Selecting Copy Paper
There are two ways to select copy pa-
per:
Auto Paper Select
The machine selects a suitable size
of copy paper automatically based
on the original size and the repro-
duction ratio.
Note
When the original is set at a dif-
ferent direction from the copy
paper in the paper tray with
Auto Tray Switch mode ON, the
machine automatically rotates
the original image by 90 to
match the copy paper direction
(the paper tray unit (option) is
required.). This applies to the
following paper sizes:
Metric version
Inch version
Reference
For Auto Tray Switch, see "13.
Auto Tray Switch" in the Sys-
tem Settings.
Manual Paper Select
You can select the desired copy pa-
per size manually. You can also se-
lect the bypass tray.
Reference
See
P.39 "Copying from the By-
pass Tray".
Note
When you use Auto Paper Select,
refer to the following table for pos-
sible copy paper sizes and direc-
tions. (if the ratio is 100%)
Basic Functions
A4 KL, B5 KL
11" KL
1
8
/
"
2
2
33
Advertisement
Table of Contents
