Advertisement
Step
Terminal Display
2
Scanning for
Wi-Fi APs
3
Select SSID
1. VFI_GUEST
2. etComm Wireless
3. VFI_LAN
3. VfCarbonTest
*
4
Enter
Wi-Fi Password
8
#
0
*********
Action
Terminal will now scan for Wi-Fi networks in
the area.
The available networks will be shown on the
screen. Use 'up' '8' or 'down' '0' to scroll
through the list in the same page (or) use page
up ' * ' and page down '#' to scroll through the
list across pages.
Keep the blue horizontal bar over the 'Wi-Fi
SSD' name and press the
that Wi-Fi network.
Enter the Wi-Fi password then press the
key.
Note: This password field will be pre-populated
after the first input. Ensure you re-enter the
password each time to prevent issues when
connecting to the Wi-Fi network.
key to connect to
53
Advertisement
