Accessing User Tools (Copier / Document Server Features); Changing Default Settings; Exiting User Tools - Ricoh Aficio 3228C Copy Reference Manual

User Tools (Copier / Document Server Features)
Accessing User Tools (Copier / Document
Server Features)
This section is for key operators in
charge of this machine. With User
Tools can change the machine's de-
fault settings.
Note
❒ Be sure to exit User Tools and re-
turn to the initial copy display af-
ter all settings are finished. This
section describes system settings
you can set for the copier function.
❒ The selected key is highlighted.
❒ Any changes you make with User
5
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the { { { { Clear
Modes} } } } key is pressed.
Reference
For details, see "Changing Default
Settings" in "User Tools (System
Settings)", General Settings Guide.

Changing Default Settings

A A A A
Press the { { { { User Tools/Counter} } } } key.
The User Tools main menu ap-
pears.
B B B B
Press [Copier / Document Server Fea-
tures].
The Copier / Document Server
Features menu is displayed.
112
C C C C
Select the menu you want to set.
The setting display for each menu
is displayed.
Reference
See p.105 "User Tools Menu
(Copier / Document Server Fea-
tures)".
D D D D
Change settings by following the
instructions on the display panel,
and then press [OK].

Exiting User Tools

A A A A
After changing default settings,
press [Exit] on the User Tools main
menu.
Changes to User Tools are com-
plete, and the machine is ready to
copy.
Note
❒ You can also exit User Tools by
pressing the { { { { User Tools/Counter} } } }
key.