Convert Colors - Ricoh Aficio 3228C Copy Reference Manual

Note
❒ When copied using the regis-
tered color, the original will be
copied lighter than the regis-
tered color.
❒ Press [Lighter] or [Darker], and
you can adjust the density in 4
steps.
When the { { { { Two-color} } } } key is
selected
A A A A
Select either [Two-color] or [Red &
Black].
When [Red & Black] is pressed
A Press [OK].
When [Two-color] is pressed
A Press [Change Color Setting].
B Press [Black Portion], and then
select the color to be replaced
by black.
Note
❒ When selecting a color from
the user colors, press [User
Color].
C Press [Non-black Portion], and
then select the color to replace
the black color of the original.
D Press [OK] twice.

Convert Colors

Copies by changing the color in the
original to a different color.
Note
❒ It is possible to specify up to 4 col-
ors.
❒ The width of the color to be con-
verted can be adjusted in 5 levels.
If the color width is set to "Wider"
and red has been specified, colors
which are close to magenta or or-
ange, will also be converted. The
color width can be adjusted in the
"User Tools". See p.125 "Color
Sensitivity"
A A A A
Press the { { { { Full Color} } } } key.
B B B B
Press [Edit / Color Creation].
C C C C
Press [Color Creation].
D D D D
Press [Convert Color].
Color Functions
2
29