Kohler 48RCLB/C Operation page 47

3.18 Programmable Interface
Module (PIM) Menus
The PIM status menu displays the status of inputs and
outputs connected to the programmable interface
module (PIM). This is a status display menu only. Input
and output settings cannot be changed from the RDC2
controller's user interface.
PIM
Status:
Figure 3-22 Programmable Interface Module (PIM) Status Menu
TP-7102 9/21
PIM 1 - - >
<- - Return
A personal computer running Kohlerr SiteTecht
software is required to change the input and output
settings. Contact an authorized dealer for service.
The Kohlerr OnCuer Plus Generator Management
System can be used to turn outputs on and off. See the
OnCuer Plus Software
instructions.
Input 1
In/Active
Input 2
In/Active
Output 1:
In/Active
Output 2:
In/Active
Output 3:
In/Active
Output 4:
In/Active
Output 5:
In/Active
Output 6:
In/Active
<- - Return
Section 3 RDC2 Controller Operation
Operation Manual for
tp6810
47