Kohler 48RCLB/C Operation page 43

3.17.1 Networking Status Submenu
The Networking Status submenu contains settings for
OnCuer Plus. See the OnCuer Plus Software
Operation Manual for information about the appropriate
network settings for OnCuer Plus.
Networking- - >
Information
Figure 3-18 Network Status Submenu
TP-7102 9/21
If DHCP is enabled, IP parameters are not displayed. If
DHCP is disabled (i.e., if a static IP address is used), the
IP parameters are displayed.
To enable or disable DHCP and change the IP settings,
go to the Networking Configuration menu. See
Section 3.17.2.
Networking- - >
Status
OnCue Status:
Connected
DHCP:
Enabled
IP Address:
0.0.0.0
Subnet Mask:
0.0.0.0
Gateway:
0.0.0.0
DNS 1:
0.0.0.0
DNS 2:
0.0.0.0
Ethernet Status:
Disconnected
OnCue Server:
0.0.0.0
<- - Return
Section 3 RDC2 Controller Operation
tp7102
43