Advertisement
1. Move the machine into the desired position. Do not lift the dryer by the top panel.
2. Have a minimum clearance on all sides of at least 20 mm.
3. Install the machine on a stable and level floor.
• Do not install your dryer in such a way that the dryer door cannot be opened fully.
• Do not install the dryer outside, in a damp place, where there is a risk of freezing, where it may be rained on, in
direct sunlight or close to a source of heat.
• Do not place your machine on top of its power cable.
Levelling the Machine
It is IMPORTANT to level the machine to ensure the machine runs efficiently with minimal noise. The dryer should be
levelled in as close to its final position as possible so it stands balanced evenly on all four feet. Ensure the dryer does
not rock in any direction.
The dryer comes with four adjustable feet, wind all four feet up or down until the
dryer is correctly level. A spirit level can assist with this process. The machine is
considered level when the bubble sits in the centre (ie within the two lines or the
circle), when the spirit level is placed flat on top of your dryer, in the directions
from:
1. left to right,
2. back to front and
3. corner to corner.
Never unscrew the feet completely from their housings.
After levelling, the corners of the dryer cabinet should be clear of the floor and the machine must not
rock in any direction.
https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Condensing/DC8060P1/User_Guide_DC8060P1/03_Installation_Instructions
Levelling the feet
Updated: Thu, 20 Jul 2023 18:15:05 GMT
Powered by
3
Advertisement
