Advertisement
Dryer or Before You Call for Service'
4. At the completion of the cycle open the door and check that there is warmth inside the dryer. This indicates the
dryer is operating normally.
If there are any problems, you must address these before proceeding with normal use. The dryer will
automatically turn off at the end of the cycle if there are no problems.
Before you start, it is a good idea to go through the following checklist:
1. Has the packaging been removed?
2. Is the machine correctly levelled, and the cabinet corners clear of the floor and walls?
3. Are the water tank, condenser and lint filter correctly in place?
4. Has the power cord been connected to an appropriate power supply and the power turned on?
5. Have you performed the installation test cycle?
6. If external draining is preferred, is the drain hose attached to the correct outlet and hooked into a standpipe or
tub?
Machine Specifications
Capacity (kg)*
Dimensions (mm)
Width
Depth
Height**
Length of drain hose
Electrical
Volts
HZ
Amps (maximum)
https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Condensing/DC8060P1/User_Guide_DC8060P1/03_Installation_Instructions
DC8060P
8
595
665
850
1300
220 – 240
50
10
Updated: Thu, 20 Jul 2023 18:15:05 GMT
Powered by
6
Advertisement
