Installing The Postscript 3 Printer Driver (Windows 95 / 98 / Me - Ipp) - Ricoh Aficio 1027 Safety Information Manual

P
Select the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use
a machine not listed here, click [Specify Address], enter the IP address or host
name of the machine, and then click [OK].
You cannot add an IP address partially similar to the one already used. For
example, if "192.168.0.2" is in use, "192.168.0.2xx" cannot be used. Similarly,
if "192.168.0.20" is in use, "192.168.0.2" cannot be used.
Q
Check that the selected port is highlighted in [Print to the following port], and
then click [OK].
R
Restart the computer to complete installation.
Note
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
❒ Auto Run may not work with certain operating system settings. In that
case, launch "Setup.exe" on the CD-ROM root directory.

Installing the PostScript 3 Printer Driver (Windows 95 / 98 / Me - IPP)

A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local Printer], and then click [Next >].
A dialog box for selecting the printer manufacturer and model name appears.
G
Select the name of the machine whose driver you want to install, and then
click [Next >].
H
In the [Available ports:] box, click [Printer Port], and then click [Next >].
I
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
Using the DeskTop Binder-SmartDeviceMonitor for Client Port
1
5