Table of Contents
Advertisement
60
en | Installing the In-Ceiling Mount
4.8
Secure Housing to Ceiling
The In-ceiling Housing is secured to the ceiling by two (2) screw clamps.
1.
2.
CAUTION!
Over torquing the Ceiling Clamps can damage the clamp or ceiling. Only tighten the clamp
until it contacts the ceiling and you start to feel some resistance. If using a power screwdriver,
set the torque level to the lowest setting.
F.01U.217.818 | 1.0 | 2011.04
Insert the In-ceiling Mount Assembly through the hole in the ceiling.
Tighten both clamps using a #2 Phillips screwdriver, to secure the housing to the ceiling.
12.7 MIN.
0.50 CEILING
mm
inches
Figure 4.11 Secure Dome to Ceiling
1
Tether Point
4
2
Ceiling Clamp
5
3
Tether Point
Installation Manual
Ceiling Clamp
Rotate Clockwise to Engage Clamp
AutoDome 100 Series Fixed Camera
41.7 MAX.
1.64 CEILING
Bosch Security Systems, Inc.
Advertisement
Table of Contents
