Replacing The Graphics Card; Procedure; Post-Requisites - Dell D27M Service Manual

Replacing the graphics card

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the graphics card with the slot on the chassis.
2 Align and place the graphics card into the slot on system board and press down
firmly until the graphics card snaps into place.
3 Replace the two screws (6-32UNCx3.6) that secure the graphics card to the
chassis.
4 Align the tab on the graphics-card bracket to the slot on the chassis.
5 Align the screw holes on the graphics-card bracket to the screw holes on the
chassis and replace the two screws (6-32UNCx3.6) that secures the graphics-
card bracket to the chassis.
6 Connect the graphics-card cable to the graphics card.
7 Place the computer in an upright position.

Post-requisites

Replace the right-side
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
71