Replacing The Logo Board; Procedure; Post-Requisites - Dell Inspiron5675 Service Manual

Identifier
Status

Replacing the logo board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Align the logo board with the slot on the chassis and replace the two screws
(M3x5) that secures the logo board to the chassis.
2 Connect the logo-board cable to the logo board.
Identifier
Status

Post-requisites

1 Replace the front
2 Replace the right-side
54
GUID-5D4718A2-DEBB-4ABC-9F1F-7E0853060193
Released
computer. After working inside your computer, follow
After working inside your
GUID-B9ACF42E-3D66-433F-AD31-F54B96224D31
Released
GUID-20BB6126-46D1-491E-A5CF-F259EFDC85F9
Released
cover.
cover.
computer. For more safety best
www.dell.com/
Before