Table of Contents
Advertisement
2. Attach the stabilisers
1. Attach the front and rear stabilisers with the nuts, bolts and washers as shown in the diagram
!
2. Be sure to fit the parts in the same order as the diagram
Check the bolts are fully tightened by making sure they penetrate
through the top of the nut
49
32
25
21
18
3. Attach the front post
1. Hook the tension cables together as shown (you may have to pull the outer tension cables firmly, to hook the
upper cable into the bracket of the lower cable)
2. Connect the computer cables as shown
3. Slide the front post tube over the front post mounting
4. Secure in place using the bolts and washers as shown - be sure to fit them in the same order as the diagram
1
4. Attach handlebars
1. Open the handlebar clamp bracket and place the handlebar inside
2. Close the clamp bracket and place the handlebar bracket cover over it
3. Secure in place using the T-bar bolt
!
Make sure T-bar bolts is
fastened tightly
49
32
25
21
2
Tension
Computer
cables
cables
49
32
25
21
49
32
25
21
18
25
14
25
21
14
21
21
25
14
FIXINGS:
FIXINGS:
Part
No.
49
x 4
Part
No.
32
x 4
Part
No.
25
x 4
Part
No.
21
x 4
Part
No.
18
x 4
FIXINGS:
FIXINGS:
Part
No.
14
x 4
Part
No.
21
x 4
Part
No.
25
x 4
7
Advertisement
Table of Contents
