Table of Contents
Advertisement
SmartPilot Verado Installation and Commissioning Guide
Seatrial calibration
The Seatrial Calibration group has been designed specifically for use during the initial seatrial
when commissioning your SmartPilot.
CAUTION:
You should not need to access Seatrial Calibration to adjust
settings during normal operation.
Dealer calibration
The Dealer Calibration group includes items that have a significant impact on SmartPilot
operation and can affect your boat's safety. Once you have commissioned the SmartPilot, you
should not normally need to alter the Dealer Calibration values.
Accessing Dealer Calibration
To prevent accidental access, we have made entry to Dealer Calibration more difficult than the
other calibration groups:
To access Dealer Calibration:
ST6002 Controllers
• press and hold the standby key for two seconds to enter the Calibration mode
• when the screen shows DISPLAY CAL, press the disp key until you see the
DEALER CAL screen
• press the auto key: the display will change to CAL ?
• press -1 and +1 together to enter Dealer Calibration mode
Dealer calibration screens and settings
The items in Dealer Calibration vary according to the vessel type you have selected.
SeaTrial calibration lock
This screen controls whether it is possible to access Seatrial Calibration.
Options
CAL LOCK OFF
CAL LOCK ON
Calibration lock off – Seatrial calibration can be accessed
(default)
Calibration lock on – Seatrial calibration cannot be
accessed
41
Hide quick links:
Advertisement
Table of Contents
