Raymarine Verado Installation And Commissioning Manual page 26

16
Connecting RF ground - preferred method
If the boat does not have a ground plate, use the alternative method
shown in the following diagram, to connect the RF ground.
RF Ground Plate
Alternative method
Note: Use this method of connecting the
not have an RF grounding plate.
When using this method, connect directly to the battery terminal. Do NOT
connect to any other point.
SmartPilot Verado Installation and Commissioning Guide
Course computer
SEATALK
Boat hull
Course computer
SEATALK
POWER IN
terminal, ONLY if the boat does
POWER IN
RF GND
RF GND