SmartPilot Verado Installation and Commissioning Guide
27
Set the Drive Type to 4
SmartPilot systems are designed to operate with a range of steering drives. Use this
calibration setting to select Drive Type 4 for Mercury Verado outboards.
1. With the SmartPilot still in Dealer Calibration, use the disp key to scroll through the cali-
bration pages until you reach the DRIVE TYP page.
2. Use the -1 or +1 keys to select DRIVE TYP 4, Hydraulic reversing pump (Type 1 pump).
3. Press disp to select the drive type and move to the next calibration option.
Save the new settings
When you have adjusted these basic settings in Dealer Calibration:
• press and hold standby for two seconds, your changes will be saved
• once saved, the controller will return to the STANDBY display