3
Install the:
a
Hard drive and optical drive module
b
Front bezel
c
Side cover
4
Follow the procedure in
System fan
Removing the system fan
1
Follow the procedure in
2
Remove the:
a
Side cover
b
Front bezel
c
Hard drive and optical drive module
3
To remove the system fan:
a
Disconnect the system fan cable from the system board [1].
b Slide the fan grommets towards the slot on the back of the fan chassis [2].
c
Lift the fan away from the system [3, 4].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
71
Need help?
Do you have a question about the Precision 3430 Small Form Factor and is the answer not in the manual?
Questions and answers