4
Install the:
a
Heat sink and heat sink fan
b
Hard drive and optical drive module
c
Front bezel
d
Side cover
5
Follow the procedure in
M.2 PCIe Solid State Drive -SSD
Removing the M.2 PCIe Solid State Drive -SSD
1
Follow the procedure in
2
Remove the:
a
Side cover
b
Front bezel
c
Hard drive and optical drive module
3
To remove the M.2 PCIe SSD card:
a
Remove the single (M2 x 3.5) screw that secures the M.2 PCIe SSD card to the system board [1].
b Lift and pull out the SSD card from its connector on the system board [2].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
49
Need help?
Do you have a question about the Precision 3430 Small Form Factor and is the answer not in the manual?